21175-1212 original ECU files
5 original (stock) ECU files with the hardware number 21175-1212 — Denso SH7058, used in Kawasaki vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 21175-1212 files 5
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 49245-1342 Kawasaki Z0.9 125hp | Denso SH7058 | 21175-1212 | — | 49245-1342 | €20 · Open |
| 49245-1613 Kawasaki Z0.9 125hp | Denso SH7058 | 21175-1212 | — | 49245-1613 | €20 · Open |
| Kawasaki Z0.9 125hp | Denso SH7058 | 21175-1212 | 21175-1212 | 49245-1126 | €20 · Open |
| 49245-1126 Kawasaki Z0.9 125hp | Denso SH7058 | — | 21175-1212 | 49245-1126 | €20 · Open |
| 21175-1362 Kawasaki Z0.9 125hp | Denso SH7058 | 21175-1212 | 21175-1362 | 49245-1317 | €20 · Open |
No file in this list matches. Search all original files →
About 21175-1212
21175-1212 is on 5 original (stock) ECU files in our catalogue: as the hardware number on 4 files and as the software number on 2 files.
They were read from Denso SH7058 (5 files) control units.
Our catalogue lists them for the Kawasaki Z (0.9 125hp).
Other numbers on these files: 1 software number (21175-1362), listed on 1 of the 5 files; 4 calibration / SW upgrade numbers (49245-1126, 49245-1342, 49245-1613, 49245-1317).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 21175-1212
- Files
- 5
- Found as
- hardware number and software number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 211751212 · 21175 1212
ECU types with 21175-1212 1
Vehicles with 21175-1212 1
Tuning for Denso SH7058 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 21175-1212 listed for?
In our catalogue: Kawasaki Z (0.9 125hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 21175-1212?
In our catalogue 21175-1212 is on files read from Denso SH7058 (5 files) control units.
There are several 21175-1212 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.