1MATAAC1 original ECU files
3 original (stock) ECU files with the calibration 1MATAAC1 — Siemens M3C, used in Ducati vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 1MATAAC1 files 3
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| S180037030Z9 Ducati Monster0.8 75hp | Siemens M3C | S180037030Z9 | — | 1MATAAC1 | €20 · Open |
| S180037030Z9 Ducati Monster0.8 75hp | Siemens M3C | S180037030Z9 | — | 1MATAAC1 | €20 · Open |
| S180037030Z9 1LABAAC1 Ducati Scrambler0.8 45hp | Siemens M3C | S180037030Z9 | 1LABAAC1 | 1MATAAC1 | €20 · Open |
No file in this list matches. Search all original files →
About 1MATAAC1
1MATAAC1 is on 3 original (stock) ECU files in our catalogue: as the calibration on 3 files and as the SW upgrade number on 3 files.
They were read from Siemens M3C (3 files) control units.
Our catalogue lists them for the Ducati Monster (0.8 75hp) and Ducati Scrambler (0.8 45hp).
Other numbers on these files: 1 hardware number (S180037030Z9); 1 software number (1LABAAC1), listed on 1 of the 3 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy. 2 of these files have the same numbers, ECU, vehicle and engine as another file in this list.
- Number
- 1MATAAC1
- Files
- 3
- Found as
- calibration and SW upgrade number
- ECU types
- 1
- Vehicles
- 2
ECU types with 1MATAAC1 1
Vehicles with 1MATAAC1 2
Tuning for Siemens M3C — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 1MATAAC1 listed for?
In our catalogue: Ducati Monster (0.8 75hp) and Ducati Scrambler (0.8 45hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 1MATAAC1?
In our catalogue 1MATAAC1 is on files read from Siemens M3C (3 files) control units.
There are several 1MATAAC1 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.