12BE1067 original ECU files
5 original (stock) ECU files with the hardware number 12BE1067 — Denso DECE01, Denso, used in Opel vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 12BE1067 files 5
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| AP45NCLAR10J Opel Astra1.7 105hp · Z17DTJ | Denso DECE01 | 12BE1067 | AP45NCLAR10J | 910TE1S1 | €20 · Open |
| AP47NCLAP06R Opel Astra1.7 110hp · Z17DTR | Denso DECE01 | 12BE1067 | AP47NCLAP06R | 760TI7S1 | €20 · Open |
| AP47NCLAR20J Opel Astra1.7 110hp · Z17DTJ | Denso DECE01 | 12BE1067 | AP47NCLAR20J | 751TJ6S1 | €20 · Open |
| AP41NCLAP11R Opel Astra1.7 125hp · Z17DTR | Denso DECE01 | 12BE1067 | AP41NCLAP11R | 711TI1S1 | €20 · Open |
| AU11NCLZQ30R Opel Astra1.7 125hp · A17DTR | Denso | 12BE1067 | AU11NCLZQ30R | 830ZI3S1 | €20 · Open |
No file in this list matches. Search all original files →
About 12BE1067
12BE1067 is on 5 original (stock) ECU files in our catalogue, always as the hardware number.
They were read from Denso DECE01 (4 files) control units; the ECU model is not recorded for 1 file.
Our catalogue lists them for the Opel Astra (1.7 110hp, 1.7 125hp, 1.7 105hp).
Other numbers on these files: 5 software numbers (AP45NCLAR10J, AP47NCLAP06R, AP47NCLAR20J, AP41NCLAP11R, …); 5 calibration / SW upgrade numbers (910TE1S1, 760TI7S1, 751TJ6S1, 711TI1S1, …).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 12BE1067
- Files
- 5
- Found as
- hardware number
- ECU types
- 1
- Vehicles
- 1
ECU types with 12BE1067 1
Vehicles with 12BE1067 1
Tuning for 12BE1067 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 12BE1067 listed for?
In our catalogue: Opel Astra (1.7 110hp, 1.7 125hp, 1.7 105hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 12BE1067?
In our catalogue 12BE1067 is on files read from Denso DECE01 (4 files) control units; the ECU model is not recorded for 1 file.
There are several 12BE1067 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.