0CW300048L original ECU files
5 original (stock) ECU files with the part number 0CW300048L — Temic DQ200 GEN2, used in Skoda, Volkswagen vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 0CW300048L files 5
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 0CW300048L 0610 Skoda Octavia1.8 180hp | Temic DQ200 GEN2 | — | — | 0CW300048L 0610 | €20 · Open |
| 0CW300048L 0611 Skoda Octavia1.8 180hp | Temic DQ200 GEN2 | — | — | 0CW300048L 0611 | €20 · Open |
| 0CW300048L 0948 Skoda Octavia1.8 180hp | Temic DQ200 GEN2 | — | — | 0CW300048L 0948 | €20 · Open |
| 0CW300048L 0945 Volkswagen Golf1.5 150hp | Temic DQ200 GEN2 | — | — | 0CW300048L 0945 | €20 · Open |
| 0CW300048L 0612 Volkswagen Golf 71.5 150hp | Temic DQ200 GEN2 | — | — | 0CW300048L 0612 | €20 · Open |
No file in this list matches. Search all original files →
About 0CW300048L
0CW300048L is on 5 original (stock) ECU files in our catalogue: as the SW upgrade number on 5 files and as the calibration on 5 files.
They were read from Temic DQ200 GEN2 (5 files) control units.
Our catalogue lists them for the Skoda Octavia (1.8 180hp), Volkswagen Golf (1.5 150hp) and Volkswagen Golf 7 (1.5 150hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 0CW300048L
- Files
- 5
- Found as
- SW upgrade number and calibration
- ECU types
- 1
- Vehicles
- 3
- Also written as
- 0CW 300 048 L
ECU types with 0CW300048L 1
Vehicles with 0CW300048L 3
More Temic DQ200 GEN2 numbers 24
Tuning for Temic DQ200 GEN2 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 0CW300048L listed for?
In our catalogue: Skoda Octavia (1.8 180hp), Volkswagen Golf (1.5 150hp) and Volkswagen Golf 7 (1.5 150hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 0CW300048L?
In our catalogue 0CW300048L is on files read from Temic DQ200 GEN2 (5 files) control units.
There are several 0CW300048L files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.