0AM300042R original ECU files
3 original (stock) ECU files with the part number 0AM300042R — Temic DQ200, used in Audi, Seat, Skoda vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 0AM300042R files 3
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 0AM300042R 6568 Audi A31.4 125hp | Temic DQ200 | — | V069XG680AM___GETRIEBE_DSG_RJXG | 0AM300042R 6568 | €20 · Open |
| 0AM300042R 6560 Seat Altea1.8 160hp | Temic DQ200 | — | V069XG600AM___GETRIEBE_DSG_OJXG | 0AM300042R 6560 | €20 · Open |
| 0AM300042R 6561 Skoda Yeti1.6 105hp · CAVD | Temic DQ200 | — | V069XG610AM___GETRIEBE_DSG_UGXG | 0AM300042R 6561 | €20 · Open |
No file in this list matches. Search all original files →
About 0AM300042R
0AM300042R is on 3 original (stock) ECU files in our catalogue: as the SW upgrade number on 3 files and as the calibration on 3 files.
They were read from Temic DQ200 (3 files) control units.
Our catalogue lists them for the Audi A3 (1.4 125hp), Seat Altea (1.8 160hp) and Skoda Yeti (1.6 105hp).
Other numbers on these files: 3 software numbers (V069XG680AM___GETRIEBE_DSG_RJXG, V069XG600AM___GETRIEBE_DSG_OJXG, V069XG610AM___GETRIEBE_DSG_UGXG).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 0AM300042R
- Files
- 3
- Found as
- SW upgrade number and calibration
- ECU types
- 1
- Vehicles
- 3
- Also written as
- 0AM 300 042 R
ECU types with 0AM300042R 1
Vehicles with 0AM300042R 3
More Temic DQ200 numbers 24
Tuning for Temic DQ200 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 0AM300042R listed for?
In our catalogue: Audi A3 (1.4 125hp), Seat Altea (1.8 160hp) and Skoda Yeti (1.6 105hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 0AM300042R?
In our catalogue 0AM300042R is on files read from Temic DQ200 (3 files) control units.
There are several 0AM300042R files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.