06A906033J original ECU files
3 original (stock) ECU files with the hardware number 06A906033J — Siemens SIMOS3.3, Siemens SIMOS3.03, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 06A906033J files 3
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 06A906033J 4382 Audi A31.6 102hp | Siemens SIMOS3.3 | 06A906033J | 4382 | 06A906033J 4382 | €20 · Open |
| 06A906033J 3488 Audi A31.6 8V 102hp | Siemens SIMOS3.03 | — | — | 06A906033J 3488 | €20 · Open |
| 06A906033J 4382 Audi A31.6 8V 102hp | Siemens SIMOS3.3 | 06A906033J | 4382 | 06A906033J 4382 | €20 · Open |
No file in this list matches. Search all original files →
About 06A906033J
06A906033J is on 3 original (stock) ECU files in our catalogue: as the SW upgrade number on 3 files, as the calibration on 3 files and as the hardware number on 2 files.
They were read from Siemens SIMOS3.3 (2 files) and Siemens SIMOS3.03 (1 file) control units.
Our catalogue lists them for the Audi A3 (1.6 8V 102hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 06A906033J
- Files
- 3
- Found as
- SW upgrade number, calibration and hardware number
- ECU types
- 2
- Vehicles
- 1
- Also written as
- 06A 906 033 J
ECU types with 06A906033J 2
Vehicles with 06A906033J 1
More Siemens SIMOS3.3 numbers 1
Tuning for 06A906033J — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 06A906033J listed for?
In our catalogue: Audi A3 (1.6 8V 102hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 06A906033J?
In our catalogue 06A906033J is on files read from Siemens SIMOS3.3 (2 files) and Siemens SIMOS3.03 (1 file) control units.
There are several 06A906033J files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.