04L906026KL original ECU files
2 original (stock) ECU files with the hardware number 04L906026KL — Bosch EDC17C74, used in Skoda vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 04L906026KL files 2
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 04L906026KL 6064 Skoda Octavia2.0 150hp · DJGAMap pack · 191 maps | Bosch EDC17C74 | 04L906026KL | 6064 | 04L906026KL 6064 | €20 · OpenWith maps €70 |
| 04L906026KL 9523 Skoda Octavia2.0 184hp · DJGA | Bosch EDC17C74 | 04L906026KL | 9523 | 04L906026KL 9523 | €20 · Open |
No file in this list matches. Search all original files →
About 04L906026KL
04L906026KL is on 2 original (stock) ECU files in our catalogue: as the calibration on 2 files, as the SW upgrade number on 2 files and as the hardware number on 2 files.
They were read from Bosch EDC17C74 (2 files) control units.
Our catalogue lists them for the Skoda Octavia (2.0 150hp, 2.0 184hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 04L906026KL
- Files
- 2
- Found as
- calibration, SW upgrade number and hardware number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 04L 906 026 KL
ECU types with 04L906026KL 1
Vehicles with 04L906026KL 1
Tuning for Bosch EDC17C74 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 04L906026KL listed for?
In our catalogue: Skoda Octavia (2.0 150hp, 2.0 184hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 04L906026KL?
In our catalogue 04L906026KL is on files read from Bosch EDC17C74 (2 files) control units.
There are several 04L906026KL files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.