Part number · 8 files

03L906018BQ original ECU files

8 original (stock) ECU files with the part number 03L906018BQ — Bosch EDC17C46, used in Audi, Skoda vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

8files
1ECU types
2models
2makes

All 03L906018BQ files 8

VehicleECUHWSWCalibration / upgrade
03L906018BQ 9978 Audi A32.0 140hp · CFHF Bosch EDC17C46 — — 03L906018BQ 9978 €20 · Open
03L906018BQ 9979 Audi A32.0 140hp · CFHFMap pack · 93 maps Bosch EDC17C46 — — 03L906018BQ 9979 €20 · OpenWith maps €60
03L906018BQ 9980 Audi A32.0 140hp · CFHF Bosch EDC17C46 — — 03L906018BQ 9980 €20 · Open
03L906018BQ 9981 Audi A32.0 140hp · CFHF Bosch EDC17C46 — — 03L906018BQ 9981 €20 · Open
03L906018BQ 9971 Skoda Yeti2.0 110hp · CFHFMap pack · 93 maps Bosch EDC17C46 — 1037529230 03L906018BQ 9971 €20 · OpenWith maps €60
1037561784 03L906018BQ 9977 Skoda Yeti2.0 140hp · CFHFMap pack · 93 maps Bosch EDC17C46 0281xxxxxx 1037561784 03L906018BQ 9977 €20 · OpenWith maps €60
0281016397 1037508247 Skoda Yeti2.0 TDI 110hp · CFHAMap pack · 93 maps Bosch EDC17C46 0281016397 1037508247 03L906018BQ 6747 €20 · OpenWith maps €60
03L906018BQ 5947 Skoda Yeti2.0 TDI 170hp · CFHA Bosch EDC17C46 — 1037505457 03L906018BQ 5947 €20 · Open

About 03L906018BQ

03L906018BQ is on 8 original (stock) ECU files in our catalogue: as the SW upgrade number on 8 files and as the calibration on 8 files.

They were read from Bosch EDC17C46 (8 files) control units.

Our catalogue lists them for the Audi A3 (2.0 140hp) and Skoda Yeti (2.0 TDI 110hp, 2.0 140hp, 2.0 TDI 170hp).

Other numbers on these files: 1 hardware number (0281016397), listed on 1 of the 8 files; 4 software numbers (1037529230, 1037561784, 1037508247, 1037505457), listed on 4 of the 8 files.

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
03L906018BQ
Files
8
Found as
SW upgrade number and calibration
ECU types
1
Vehicles
2
Also written as
03L 906 018 BQ

ECU types with 03L906018BQ 1

Vehicles with 03L906018BQ 2

More Bosch EDC17C46 numbers 24

Need a modified file?

Tuning for Bosch EDC17C46 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 03L906018BQ listed for?

In our catalogue: Audi A3 (2.0 140hp) and Skoda Yeti (2.0 TDI 110hp, 2.0 140hp, 2.0 TDI 170hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 03L906018BQ?

In our catalogue 03L906018BQ is on files read from Bosch EDC17C46 (8 files) control units.

There are several 03L906018BQ files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.