03H906032L original ECU files
3 original (stock) ECU files with the hardware number 03H906032L — Bosch MED9.1, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 03H906032L files 3
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 03H906032L 9744 Audi Q73.6 280hp · BHK | Bosch MED9.1 | 03H906032L | 9744 | 03H906032L 9744 | €20 · Open |
| 03H906032L 9547 Audi Q73.6 V6 24v FSI 280hp · BHK | Bosch MED9.1 | 03H906032L | 9547 | 03H906032L 9547 | €20 · Open |
| 03H906032L 9878 Audi Q73.6 V6 24v FSI 280hp · BHK | Bosch MED9.1 | 03H906032L | 9878 | 03H906032L 9878 | €20 · Open |
No file in this list matches. Search all original files →
About 03H906032L
03H906032L is on 3 original (stock) ECU files in our catalogue: as the calibration on 3 files and as the hardware number on 3 files.
They were read from Bosch MED9.1 (3 files) control units.
Our catalogue lists them for the Audi Q7 (3.6 V6 24v FSI 280hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 03H906032L
- Files
- 3
- Found as
- calibration and hardware number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 03H 906 032 L
ECU types with 03H906032L 1
Vehicles with 03H906032L 1
Tuning for Bosch MED9.1 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 03H906032L listed for?
In our catalogue: Audi Q7 (3.6 V6 24v FSI 280hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 03H906032L?
In our catalogue 03H906032L is on files read from Bosch MED9.1 (3 files) control units.
There are several 03H906032L files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.