03G906016AT original ECU files
2 original (stock) ECU files with the hardware number 03G906016AT — Bosch EDC16U1, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 03G906016AT files 2
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 03G906016AT 5689 Audi A32.0 140hpMap pack · 59 maps | Bosch EDC16U1 | 03G906016AT | 5689 | 03G906016AT-5689 | €20 · OpenWith maps €60 |
| 03G906016AT 7643 Audi A32.0 TDI 140hp · R4 2,0L EDC | Bosch EDC16U1 | 03G906016AT | 7643 | 03G906016AT 7643 | €20 · Open |
No file in this list matches. Search all original files →
About 03G906016AT
03G906016AT is on 2 original (stock) ECU files in our catalogue: as the hardware number on 2 files, as the calibration on 1 file and as the SW upgrade number on 1 file.
They were read from Bosch EDC16U1 (2 files) control units.
Our catalogue lists them for the Audi A3 (2.0 TDI 140hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 03G906016AT
- Files
- 2
- Found as
- hardware number, calibration and SW upgrade number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 03G 906 016 AT
ECU types with 03G906016AT 1
Vehicles with 03G906016AT 1
Tuning for Bosch EDC16U1 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 03G906016AT listed for?
In our catalogue: Audi A3 (2.0 TDI 140hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 03G906016AT?
In our catalogue 03G906016AT is on files read from Bosch EDC16U1 (2 files) control units.
There are several 03G906016AT files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.