03F906070GN original ECU files
5 original (stock) ECU files with the part number 03F906070GN — Siemens SIMOS10.24, used in Audi, Volkswagen vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 03F906070GN files 5
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 03F906070GN 2697 Audi A11.2 86hpMap pack · 72 maps | Siemens SIMOS10.24 | — | — | 03F906070GN 2697 | €20 · OpenWith maps €60 |
| 03F906070GN 4046 Audi A11.2 86hp · CBZA | Siemens SIMOS10.24 | — | — | 03F906070GN 4046 | €20 · Open |
| 03F906070GN 5468 Audi A11.2 86hp · CBZAMap pack · 35 maps | Siemens SIMOS10.24 | — | — | 03F906070GN 5468 | €20 · OpenWith maps €60 |
| 03F906070GN 5468 Volkswagen Polo1.2 90hp · CBZB | Siemens SIMOS10.24 | — | — | 03F906070GN 5468 | €20 · Open |
| 546603F907309AJ 03F906070GD Volkswagen Polo1.2 90hp · CBZB | Siemens SIMOS10.24 | 546603F907309AJ | 03F906070GD | 03F906070GN 5468 | €20 · Open |
No file in this list matches. Search all original files →
About 03F906070GN
03F906070GN is on 5 original (stock) ECU files in our catalogue: as the calibration on 5 files and as the SW upgrade number on 5 files.
They were read from Siemens SIMOS10.24 (5 files) control units.
Our catalogue lists them for the Audi A1 (1.2 86hp) and Volkswagen Polo (1.2 90hp).
Other numbers on these files: 1 hardware number (546603F907309AJ), listed on 1 of the 5 files; 1 software number (03F906070GD), listed on 1 of the 5 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 03F906070GN
- Files
- 5
- Found as
- calibration and SW upgrade number
- ECU types
- 1
- Vehicles
- 2
- Also written as
- 03F 906 070 GN
ECU types with 03F906070GN 1
Vehicles with 03F906070GN 2
Tuning for Siemens SIMOS10.24 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 03F906070GN listed for?
In our catalogue: Audi A1 (1.2 86hp) and Volkswagen Polo (1.2 90hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 03F906070GN?
In our catalogue 03F906070GN is on files read from Siemens SIMOS10.24 (5 files) control units.
There are several 03F906070GN files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.