Part number · 3 files

03F906070GJ original ECU files

3 original (stock) ECU files with the part number 03F906070GJ — Siemens SIMOS10.13, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

3files
1ECU types
1models
1makes

All 03F906070GJ files 3

VehicleECUHWSWCalibration / upgrade
03F906070GJ 2680 Audi A31.2 105hp · CBZB Siemens SIMOS10.13 — — 03F906070GJ 2680 €20 · Open
03F907309T 3632 Audi A31.2 105hp Siemens SIMOS10.13 03F907309T 3632 03F906070GJ 3632 €20 · Open
03F906070GJ 3632 Audi A31.2 105hp Siemens SIMOS10.13 03F906070GJ 3632 03F906070GJ 3632 €20 · Open

About 03F906070GJ

03F906070GJ is on 3 original (stock) ECU files in our catalogue: as the SW upgrade number on 3 files, as the calibration on 3 files and as the hardware number on 1 file.

They were read from Siemens SIMOS10.13 (3 files) control units.

Our catalogue lists them for the Audi A3 (1.2 105hp).

Other numbers on these files: 1 hardware number (03F907309T), listed on 1 of the 3 files.

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
03F906070GJ
Files
3
Found as
SW upgrade number, calibration and hardware number
ECU types
1
Vehicles
1
Also written as
03F 906 070 GJ

ECU types with 03F906070GJ 1

Vehicles with 03F906070GJ 1

More Siemens SIMOS10.13 numbers 8

Need a modified file?

Tuning for Siemens SIMOS10.13 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 03F906070GJ listed for?

In our catalogue: Audi A3 (1.2 105hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 03F906070GJ?

In our catalogue 03F906070GJ is on files read from Siemens SIMOS10.13 (3 files) control units.

There are several 03F906070GJ files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.