03D997033F original ECU files
3 original (stock) ECU files with the part number 03D997033F — Siemens SIMOS 3.00, Siemens SIMOS3, used in Volkswagen vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 03D997033F files 3
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 5WP4029 03D997033F 7001 Volkswagen Golf 41.6 101hp | Siemens SIMOS 3.00 | 5WP4029 | 3gf_7001S3G045 | 03D997033F 7001 | €20 · Open |
| 5WP4029 03D997033F 7001 Volkswagen Polo1.2 55hp | Siemens SIMOS 3.00 | 5WP4029 | 3gf_7001S3G045 | 03D997033F 7001 | €20 · Open |
| 03D997033F 7001 Volkswagen Polo1.2 55hp | Siemens SIMOS3 | 03D997033F | 7001 | 03D997033F 7001 | €20 · Open |
No file in this list matches. Search all original files →
About 03D997033F
03D997033F is on 3 original (stock) ECU files in our catalogue: as the calibration on 3 files, as the SW upgrade number on 3 files and as the hardware number on 1 file.
They were read from Siemens SIMOS 3.00 (2 files) and Siemens SIMOS3 (1 file) control units.
Our catalogue lists them for the Volkswagen Polo (1.2 55hp) and Volkswagen Golf 4 (1.6 101hp).
Other numbers on these files: 1 hardware number (5WP4029), listed on 2 of the 3 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 03D997033F
- Files
- 3
- Found as
- calibration, SW upgrade number and hardware number
- ECU types
- 2
- Vehicles
- 2
- Also written as
- 03D 997 033 F
ECU types with 03D997033F 2
Vehicles with 03D997033F 2
Tuning for 03D997033F — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 03D997033F listed for?
In our catalogue: Volkswagen Polo (1.2 55hp) and Volkswagen Golf 4 (1.6 101hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 03D997033F?
In our catalogue 03D997033F is on files read from Siemens SIMOS 3.00 (2 files) and Siemens SIMOS3 (1 file) control units.
There are several 03D997033F files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.