03C906027F original ECU files
3 original (stock) ECU files with the hardware number 03C906027F — Bosch MED17.5.5, used in Volkswagen vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 03C906027F files 3
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 03C906027F 3093 Volkswagen Scirocco1.4 16v TSI 160hp · CAVDMap pack · 41 maps | Bosch MED17.5.5 | 03C906027F | 3093 | 03C906027F 3093 | €20 · OpenWith maps €60 |
| 03C906027F 3427 Volkswagen Scirocco1.4 16v TSI 160hp · CAVD | Bosch MED17.5.5 | 03C906027F | 3427 | 03C906027F 3427 | €20 · Open |
| 03C906027F 4008 Volkswagen Scirocco1.4 16v TSI 160hp · CAVDMap pack · 43 maps | Bosch MED17.5.5 | 03C906027F | 4008 | 03C906027F 4008 | €20 · OpenWith maps €60 |
No file in this list matches. Search all original files →
About 03C906027F
03C906027F is on 3 original (stock) ECU files in our catalogue: as the calibration on 3 files, as the SW upgrade number on 3 files and as the hardware number on 3 files.
They were read from Bosch MED17.5.5 (3 files) control units.
Our catalogue lists them for the Volkswagen Scirocco (1.4 16v TSI 160hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 03C906027F
- Files
- 3
- Found as
- calibration, SW upgrade number and hardware number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 03C 906 027 F
ECU types with 03C906027F 1
Vehicles with 03C906027F 1
Tuning for Bosch MED17.5.5 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 03C906027F listed for?
In our catalogue: Volkswagen Scirocco (1.4 16v TSI 160hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 03C906027F?
In our catalogue 03C906027F is on files read from Bosch MED17.5.5 (3 files) control units.
There are several 03C906027F files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.