03C906016BL original ECU files
5 original (stock) ECU files with the hardware number 03C906016BL — Bosch MED17.5.5, used in Audi, Volkswagen vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 03C906016BL files 5
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 03C906016BL 9085 Audi A31.4 125hp · CMSA | Bosch MED17.5.5 | 03C906016BL | 9085 | 03C906016BL 9085 | €20 · Open |
| 03C906016BL 9970 Audi A31.4 125hp · CMSA | Bosch MED17.5.5 | 03C906016BL | 9970 | 03C906016BL 9970 | €20 · Open |
| 03C906016BL 7938 Audi A31.4 16v TFSI 125hp · CMSA | Bosch MED17.5.5 | 03C906016BL | 7938 | 03C906016BL 7938 | €20 · Open |
| 03C906016BL 8484 Volkswagen Scirocco1.4 122hp | Bosch MED17.5.5 | 03C906016BL | 8484 | 03C906016BL 8484 | €20 · Open |
| 03C906016BL 8931 Volkswagen Scirocco1.4 122hp · CMSA | Bosch MED17.5.5 | 03C906016BL | 8931 | 03C906016BL 8931 | €20 · Open |
No file in this list matches. Search all original files →
About 03C906016BL
03C906016BL is on 5 original (stock) ECU files in our catalogue: as the calibration on 5 files, as the SW upgrade number on 5 files and as the hardware number on 5 files.
They were read from Bosch MED17.5.5 (5 files) control units.
Our catalogue lists them for the Audi A3 (1.4 16v TFSI 125hp) and Volkswagen Scirocco (1.4 122hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 03C906016BL
- Files
- 5
- Found as
- calibration, SW upgrade number and hardware number
- ECU types
- 1
- Vehicles
- 2
- Also written as
- 03C 906 016 BL
ECU types with 03C906016BL 1
Vehicles with 03C906016BL 2
Tuning for Bosch MED17.5.5 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 03C906016BL listed for?
In our catalogue: Audi A3 (1.4 16v TFSI 125hp) and Volkswagen Scirocco (1.4 122hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 03C906016BL?
In our catalogue 03C906016BL is on files read from Bosch MED17.5.5 (5 files) control units.
There are several 03C906016BL files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.