0281011401 original ECU files
4 original (stock) ECU files with the hardware number 0281011401 — Bosch EDC15C7, Bosch EDC15C, used in Fiat vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 0281011401 files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 1037367474 Fiat Scudo1.9 JTD 85hp | Bosch EDC15C7 | 0281011401 | 1037367474 | 1037367474 | €20 · Open |
| 1037375180 Fiat Scudo1.9 JTD 85hp | Bosch EDC15C7 | 0281011401 | 1037375180 | 1037375180 | €20 · Open |
| 1037367474 Fiat Strada1.9 80hp | Bosch EDC15C | 0281011401 | 1037367474 | — | €20 · Open |
| 1037367474 Fiat Strada1.9 JTD 80hp | Bosch EDC15C7 | 0281011401 | 1037367474 | 1037367474 | €20 · Open |
No file in this list matches. Search all original files →
About 0281011401
0281011401 is on 4 original (stock) ECU files in our catalogue, always as the hardware number.
They were read from Bosch EDC15C7 (3 files) and Bosch EDC15C (1 file) control units.
Our catalogue lists them for the Fiat Scudo (1.9 JTD 85hp) and Fiat Strada (1.9 JTD 80hp).
Other numbers on these files: 2 software numbers (1037367474, 1037375180).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 0281011401
- Files
- 4
- Found as
- hardware number
- ECU types
- 2
- Vehicles
- 2
- Also written as
- 0 281 011 401
ECU types with 0281011401 2
Vehicles with 0281011401 2
Tuning for 0281011401 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 0281011401 listed for?
In our catalogue: Fiat Scudo (1.9 JTD 85hp) and Fiat Strada (1.9 JTD 80hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 0281011401?
In our catalogue 0281011401 is on files read from Bosch EDC15C7 (3 files) and Bosch EDC15C (1 file) control units.
There are several 0281011401 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.