Siemens SIMOS 8.5 · WinOLS mappacks

Siemens SIMOS 8.5 WinOLS mappacks

7 Siemens SIMOS 8.5 original files (Audi) with a WinOLS mappack. Open a file to see all of its maps and buy the original + mappack — from €60.

7files with a mappack
106maps in a typical pack (30–108)
from €60original + mappack

Siemens SIMOS 8.5 files with a mappack 7

VehicleECUHWSWMaps
Audi A53.0 272hp Siemens SIMOS 8.5 650S855584 S8500D7000000111 30Engine Torque, Spark Advance, Injection System, Air Control View & buy · €60
Audi A73.0 299hp Siemens SIMOS 8.5 — CAL 4G0907551A 0005 98Engine Torque, Limiters, Injection System, Spark Advance View & buy · €60
Audi A83.0 333hp Siemens SIMOS 8.5 — CAL 4G0907551G 0002 107Engine Torque, Limiters, Injection System, Spark Advance View & buy · €60
Audi A83.0 333hp Siemens SIMOS 8.5 — CAL 4H0907551J 0002 107Engine Torque, Limiters, Injection System, Spark Advance View & buy · €60
Audi Q53.0 272hp Siemens SIMOS 8.5 — CAL 8K5907551E 0004 106Engine Torque, Limiters, Injection System, Air Control View & buy · €60
Audi S53.0 333hp Siemens SIMOS 8.5 — CAL 8K5907551D 0002 108Engine Torque, Limiters, Injection System, Air Control View & buy · €60
Audi SQ53.0 299hp Siemens SIMOS 8.5 — CAL 8R0907551D 0003 31Engine Torque, Spark Advance, Injection System, Air Control View & buy · €60

What is in our map packs. Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values, ready to read. Every map of the export is included, listed by category — you see each map's name before you buy.

Maps found in Siemens SIMOS 8.5 packs share of our 7 packs that define each map

Limiter of Maximum torque100%Volumetric pressure100%Torque request during take off condition100%Rail pressure100%Air quantity - Base map100%Requested Lambda100%Injection at full load100%Requested engine load100%Injection base map100%Spark Advance base map100%Calculated engine torque100%Optimal engine torque100%Optimal Spark Advance100%Injection enrichment100%Engine load limiter71%RPM Limiter71%Spark advance during cranking71%Torque request during take off condition - Automatic Transmission71%Injection correction71%Maximum speed of vehicle71%Throttle valve71%Exhaust gas temperature71%Torque limiter for vehicle speed71%Torque limiter for clutch protection71%Maximum engine torque correction f(IAT_T)71%Torque request - High speed57%Spark advance correction f(Trq)57%Torque request during standard condition57%Torque request - Low speed57%Torque request - High speed AT57%Torque request - Low speed AT57%Torque request - Reverse Gear57%

Questions

What is a WinOLS mappack for Siemens SIMOS 8.5?

The list of maps defined in one Siemens SIMOS 8.5 software version — each map's name, category, size, axes and position in the file — as a CSV that imports into WinOLS. A typical Siemens SIMOS 8.5 pack has 106 maps. It holds no tuned values.

Is it a DAMOS or A2L file?

No. A DAMOS / A2L is the manufacturer's full description of the software. Our pack is the WinOLS map list of one software version, delivered together with the original read of that version.

Which Siemens SIMOS 8.5 pack fits my ECU?

The one with your software version: compare the HW and SW numbers in the table with your own read. The vehicle name alone is not enough — the numbers decide. All sales are final, so check them before you buy.

What do I get?

A ZIP sent by e-mail with two files: the stock .bin read and the .csv map list for this exact SW version. WinOLS imports the .csv the same way as a .kp map pack.

Is it free? Can I see the maps first?

It is not free: original + mappack from €60. Every pack page lists all of its map names, grouped by category, before you buy.