Siemens SIMOS 8.4 · WinOLS mappacks

Siemens SIMOS 8.4 WinOLS mappacks

5 Siemens SIMOS 8.4 original files (Audi) with a WinOLS mappack. Open a file to see all of its maps and buy the original + mappack — from €60.

5files with a mappack
76maps in a typical pack (73–118)
from €60original + mappack

Siemens SIMOS 8.4 files with a mappack 5

VehicleECUHWSWMaps
Audi S43.0 333hp Siemens SIMOS 8.4 — CAL 8K0907551C 0002 75Engine Torque, Injection System, Limiters, Spark Advance View & buy · €60
Audi S43.0 333hp Siemens SIMOS 8.4 — CAL 8K0907551D 0003 76Engine Torque, Injection System, Limiters, Spark Advance View & buy · €60
Audi S43.0 333hp Siemens SIMOS 8.4 — CAL 8K0907551 0004 73Engine Torque, Limiters, Spark Advance, Injection System View & buy · €60
Audi S43.0 333hp Siemens SIMOS 8.4 — CAL 8K0907551C 0005 112Air Control, Engine Torque, Spark Advance, Injection System View & buy · €60
Audi S53.0 333hp Siemens SIMOS 8.4 — CAL 8K0907551 0005 118Engine Torque, Air Control, Spark Advance, Injection System View & buy · €60

What is in our map packs. Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values, ready to read. Every map of the export is included, listed by category — you see each map's name before you buy.

Maps found in Siemens SIMOS 8.4 packs share of our 5 packs that define each map

Torque limiter for vehicle speed100%Injection base map100%Maximum speed of vehicle100%Injection correction100%Throttle valve100%Calculated engine torque100%Optimal engine torque100%Limiter of Maximum torque100%Injection enrichment100%Torque request during take off condition - Automatic Transmission100%Exhaust gas temperature100%Torque request during take off condition100%Volumetric pressure100%Air quantity - Base map100%Optimal Spark Advance100%Spark Advance base map100%Torque limiter for clutch protection100%Requested Lambda100%Rail pressure100%MAF100%Engine load limiter100%Requested engine load100%RPM Limiter100%Torque request - Low speed80%Torque request - Reverse Gear80%Torque request - High speed80%Torque request during standard condition60%Injection at full load60%Airflow mass through throttle valve40%DWELL40%Maximum torque limiter f(gear)40%Minimum relative air charge for catalyst diagnosis40%Minimum thermal cutoff - TCO40%Transmission ratio supercharger-crankshaft40%Max value of catalyst temperature to enable diagnosis40%Maximum MAP sensor40%Thermal cutoff - TCO sensor40%Minimum Spark Advance40%Maximum relative air charge for catalyst diagnosis40%Maximum thermal cutoff - TCO40%Maximum allowable exhaust gas temperature for spark retard control40%Spark retard at recognised knocking40%Limiter of Lambda A40%Lambda for component protection40%Permissible retard before catalyst overheating prevention40%

Questions

What is a WinOLS mappack for Siemens SIMOS 8.4?

The list of maps defined in one Siemens SIMOS 8.4 software version — each map's name, category, size, axes and position in the file — as a CSV that imports into WinOLS. A typical Siemens SIMOS 8.4 pack has 76 maps. It holds no tuned values.

Is it a DAMOS or A2L file?

No. A DAMOS / A2L is the manufacturer's full description of the software. Our pack is the WinOLS map list of one software version, delivered together with the original read of that version.

Which Siemens SIMOS 8.4 pack fits my ECU?

The one with your software version: compare the HW and SW numbers in the table with your own read. The vehicle name alone is not enough — the numbers decide. All sales are final, so check them before you buy.

What do I get?

A ZIP sent by e-mail with two files: the stock .bin read and the .csv map list for this exact SW version. WinOLS imports the .csv the same way as a .kp map pack.

Is it free? Can I see the maps first?

It is not free: original + mappack from €60. Every pack page lists all of its map names, grouped by category, before you buy.