Siemens SIMOS 8.3 · WinOLS mappacks

Siemens SIMOS 8.3 WinOLS mappacks

5 Siemens SIMOS 8.3 original files (Audi) with a WinOLS mappack. Open a file to see all of its maps and buy the original + mappack — from €60.

5files with a mappack
99maps in a typical pack (23–101)
from €60original + mappack

Siemens SIMOS 8.3 files with a mappack 5

VehicleECUHWSWMaps
Audi A63.0 290hp Siemens SIMOS 8.3 — CAL 4F1910551 0050 23Engine Torque, Injection System, Spark Advance, Air Control View & buy · €60
Audi A63.0 300hp Siemens SIMOS 8.3 — CAL 4F1910551 0060 101Engine Torque, Spark Advance, Air Control, Limiters View & buy · €60
Audi A63.2 290hp Siemens SIMOS 8.3 — CAL 4F1910551 0080 100Engine Torque, Spark Advance, Air Control, Limiters View & buy · €60
Audi A63.2 290hp Siemens SIMOS 8.3 — CAL 4F1910551 0030 97Engine Torque, Spark Advance, Air Control, Limiters View & buy · €60
Audi A63.0 300hp Siemens SIMOS 8.3 6576655287 CAL 4F1910551D 0030 99Engine Torque, Spark Advance, Air Control, Limiters View & buy · €60

What is in our map packs. Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values, ready to read. Every map of the export is included, listed by category — you see each map's name before you buy.

Maps found in Siemens SIMOS 8.3 packs share of our 5 packs that define each map

Optimal Spark Advance100%Limiter of Maximum torque100%Injection base map100%Requested engine load100%Requested Lambda100%Spark Advance base map100%Injection enrichment100%Rail pressure100%Injection at full load100%Calculated engine torque100%Torque request during take off condition100%Air quantity - Base map100%Optimal engine torque100%Torque limiter for vehicle speed80%Engine torque correction80%Maximum speed of vehicle80%Spark advance during cranking80%Injection correction80%Throttle valve80%Torque request during standard condition80%Torque request during take off condition - Automatic Transmission80%Exhaust gas temperature80%Limiter of knocking sensor80%RPM limiter in Neutral80%Volumetric pressure80%Maximum engine torque correction f(IAT_T)80%Torque request - High speed80%Maximum MAF sensor80%Torque limiter for clutch protection80%Spark Advance correction in function of high ECT and IAT80%Engine load limiter80%RPM Limiter80%Turbo pressure60%Torque request - Low speed40%Torque request - High speed AT40%Torque request - Reverse Gear40%Torque request - Low speed AT40%

Questions

What is a WinOLS mappack for Siemens SIMOS 8.3?

The list of maps defined in one Siemens SIMOS 8.3 software version — each map's name, category, size, axes and position in the file — as a CSV that imports into WinOLS. A typical Siemens SIMOS 8.3 pack has 99 maps. It holds no tuned values.

Is it a DAMOS or A2L file?

No. A DAMOS / A2L is the manufacturer's full description of the software. Our pack is the WinOLS map list of one software version, delivered together with the original read of that version.

Which Siemens SIMOS 8.3 pack fits my ECU?

The one with your software version: compare the HW and SW numbers in the table with your own read. The vehicle name alone is not enough — the numbers decide. All sales are final, so check them before you buy.

What do I get?

A ZIP sent by e-mail with two files: the stock .bin read and the .csv map list for this exact SW version. WinOLS imports the .csv the same way as a .kp map pack.

Is it free? Can I see the maps first?

It is not free: original + mappack from €60. Every pack page lists all of its map names, grouped by category, before you buy.