Siemens SIMOS 18.4 · WinOLS mappacks
Siemens SIMOS 18.4 WinOLS mappacks
2 Siemens SIMOS 18.4 original files (Audi) with a WinOLS mappack. Open a file to see all of
its maps and buy the original + mappack — from €70.
2files with a mappack
357maps in a typical pack (356–357)
from €70original + mappack
Siemens SIMOS 18.4 files with a mappack 2
| Vehicle | ECU | HW | SW | Maps | |
| Audi A52.0 252hp |
Siemens SIMOS 18.4 |
— |
CAL 8W0906259E 0003 |
357Spark Advance, Engine Torque, Air Control, Limiters |
View & buy · €70 |
| Audi Q52.0 252hp |
Siemens SIMOS 18.4 |
— |
CAL 80A906259A 0003 |
356Spark Advance, Engine Torque, Air Control, Limiters |
View & buy · €70 |
What is in our map packs. Maps with correctly labelled X and Y axes in the right format and the correct factor
for the data values, ready to read. Every map of the export is included, listed by category — you see each map's
name before you buy.
Maps found in Siemens SIMOS 18.4 packs share of our 2 packs that define each map
Maximum MAF sensor100%Threshold of end limitation on throttle valve angle100%Engine torque correction100%Engine load limiter100%Spark Advance correction in function of high ECT and IAT100%RPM limiter (higher threshold)100%RPM Limiter100%Wastegate Duty Cycle100%Calculated engine torque100%Minimum pressure difference for basic charge air pressure too low100%Torque request during standard condition100%Threshold for turbocharger speed reduction100%Reference of maximum throttle valve angle100%Requested Lambda100%Boost pressure deviation for basic charge air pressure too low100%Deactivation turbocharger protection (1=ON, 0=OFF)100%Linearization of impulsive turbo pressure100%Minimum pressure difference for basic charge air pressure too high100%Injection at full load100%Temperature difference to activate turbine overheating protection100%Correction of impulsive turbo pressure f(IAT)100%Injection base map100%Minimum MAF sensor100%Optimal Spark Advance100%RPM limiter in Neutral100%Maximum engine torque correction f(ECT_T)100%Maximum speed of vehicle100%Limiter of Lambda A100%Limiter of Turbo pressure100%Manual Setpoint MAP100%Spark Advance base map100%Limiter of Lambda B100%Airflow mass through throttle valve100%Exhaust gas temperature100%Throttle valve100%Limiter of Maximum torque100%Spark advance correction f(Air_T)100%Minimum Spark Advance100%Limiter of knocking sensor100%Maximum turbocharger temperature100%Maximum allowable exhaust gas temperature for spark retard control100%MAP sensor maximum voltage100%Maximum torque limiter f(gear)100%Lambda Sensor (1=ON, 0=OFF)100%Maximum turbocharger speed100%Torque limiter for clutch protection100%Requested engine load100%Maximum engine torque correction f(IAT_T)100%Limiter of impulsive turbo pressure100%Rail pressure100%Optimal engine torque100%Cylinder head temperature100%
Questions
What is a WinOLS mappack for Siemens SIMOS 18.4?
The list of maps defined in one Siemens SIMOS 18.4 software version — each map's name, category, size, axes and position in the file — as a CSV that imports into WinOLS. A typical Siemens SIMOS 18.4 pack has 357 maps. It holds no tuned values.
Is it a DAMOS or A2L file?
No. A DAMOS / A2L is the manufacturer's full description of the software. Our pack is the WinOLS map list of one software version, delivered together with the original read of that version.
Which Siemens SIMOS 18.4 pack fits my ECU?
The one with your software version: compare the HW and SW numbers in the table with your own read. The vehicle name alone is not enough — the numbers decide. All sales are final, so check them before you buy.
What do I get?
A ZIP sent by e-mail with two files: the stock .bin read and the .csv map list for this exact SW version. WinOLS imports the .csv the same way as a .kp map pack.
Is it free? Can I see the maps first?
It is not free: original + mappack from €70. Every pack page lists all of its map names, grouped by category, before you buy.