Siemens MSD85.1 · WinOLS mappacks

Siemens MSD85.1 WinOLS mappacks

4 Siemens MSD85.1 original files (BMW) with a WinOLS mappack. Open a file to see all of its maps and buy the original + mappack — from €60.

4files with a mappack
116maps in a typical pack (31–116)
from €60original + mappack

Siemens MSD85.1 files with a mappack 4

VehicleECUHWSWMaps
BMW X Series4.4 408hp Siemens MSD85.1 — CAL LJ38393 116Spark Advance, Engine Torque, Limiters, Turbo System View & buy · €60
BMW X Series4.4 408hp Siemens MSD85.1 07607985 07612590 32Spark Advance, Limiters, Turbo System, Injection System View & buy · €60
BMW X Series4.4 408hp Siemens MSD85.1 07644029 07644058 116Spark Advance, Engine Torque, Limiters, Turbo System View & buy · €60
BMW X Series4.4 407hp Siemens MSD85.1 07649411 08615018 31Limiters, Turbo System, Injection System, Variable Valve Timing (VVT) View & buy · €60

What is in our map packs. Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values, ready to read. Every map of the export is included, listed by category — you see each map's name before you buy.

Maps found in Siemens MSD85.1 packs share of our 4 packs that define each map

Calculated engine torque100%Requested Lambda100%Lambda for component protection100%Limiter of Turbo pressure100%RPM Limiter100%Injection base map100%Airflow mass through throttle valve100%Optimal engine torque100%Optimal Spark Advance100%Spark Advance base map100%Exhaust - Temperature correction50%Intake - Temperature correction50%RPM limiter (higher threshold)50%RPM limiter (lower threshold)50%Correction of steady turbo pressure f(IAT)50%Rail pressure50%Exhaust50%Engine torque correction50%Wastegate Duty Cycle50%Torque request during standard condition50%Turbine efficiency50%Torque request during take off condition50%Injection at full load50%Intake50%Injection correction50%Spark Advance at full load50%Maximum engine torque correction f(ECT_T)50%Maximum speed of vehicle50%Limiter of Maximum torque50%Limiter of Turbo pressure f(IAT)50%Minimum Spark Advance50%Limiter of knocking sensor50%Spark Advance at partial load50%Spark advance at low load50%Lambda Sensor (1=ON, 0=OFF)50%Torque limiter for clutch protection50%Torque monitoring50%

Questions

What is a WinOLS mappack for Siemens MSD85.1?

The list of maps defined in one Siemens MSD85.1 software version — each map's name, category, size, axes and position in the file — as a CSV that imports into WinOLS. A typical Siemens MSD85.1 pack has 116 maps. It holds no tuned values.

Is it a DAMOS or A2L file?

No. A DAMOS / A2L is the manufacturer's full description of the software. Our pack is the WinOLS map list of one software version, delivered together with the original read of that version.

Which Siemens MSD85.1 pack fits my ECU?

The one with your software version: compare the HW and SW numbers in the table with your own read. The vehicle name alone is not enough — the numbers decide. All sales are final, so check them before you buy.

What do I get?

A ZIP sent by e-mail with two files: the stock .bin read and the .csv map list for this exact SW version. WinOLS imports the .csv the same way as a .kp map pack.

Is it free? Can I see the maps first?

It is not free: original + mappack from €60. Every pack page lists all of its map names, grouped by category, before you buy.