Siemens SIMOS 18 WinOLS mappack
Audi Q5 · CNCD
- One ZIP by e-mail: the original .bin + the .csv mappack for WinOLS
- Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values
- Tuning maps only — no maps for switching off emission systems or errors
- Axes checked against this exact original: 562 of 570 read correctly
- No account — your e-mail and a card
- Check the HW / SW above against your read — all sales are final
Engine Torque 130 maps
- Calculated engine torque
- Engine torque correction 6 maps
- Limiter of Maximum torque 46 maps
- Maximum engine torque correction f(ECT_T) 10 maps
- Maximum engine torque correction f(IAT_T) 5 maps
- Optimal engine torque 24 maps
- Torque limiter for clutch protection 15 maps
- Torque request during standard condition
- Torque request during take off condition 22 maps
Spark Advance 116 maps
- Limiter of knocking sensor 8 maps
- Minimum Spark Advance 32 maps
- Optimal Spark Advance 56 maps
- Spark Advance base map 19 maps
- Spark advance correction f(Air_T)
Air Control 47 maps
- Airflow mass through throttle valve
- Cylinder head temperature 4 maps
- Engine load limiter 4 maps
- Exhaust gas temperature 4 maps
- MAP sensor maximum voltage
- Manual Setpoint MAP
- Maximum MAF sensor
- Maximum MAP sensor
- Maximum allowable exhaust gas temperature for spark retard control
- Minimum MAF sensor
- Reference of maximum throttle valve angle
- Requested engine load 24 maps
- Threshold of end limitation on throttle valve angle 2 maps
- Throttle valve
Turbo System 25 maps
- Boost pressure deviation for basic charge air pressure too low
- Correction of impulsive turbo pressure f(IAT)
- Limiter of Turbo pressure 9 maps
- Limiter of impulsive turbo pressure 2 maps
- Linearization of impulsive turbo pressure 2 maps
- Maximum turbocharger speed
- Maximum turbocharger temperature
- Minimum pressure difference for basic charge air pressure too high
- Minimum pressure difference for basic charge air pressure too low
- Temperature difference to activate turbine overheating protection
- Threshold for turbocharger speed reduction
- Wastegate Duty Cycle 4 maps
Limiters 23 maps
- Maximum speed of vehicle 6 maps
- RPM Limiter 13 maps
- RPM limiter (lower threshold)
- RPM limiter in Neutral 3 maps
Rail 12 maps
- Rail pressure 12 maps
Injection System 11 maps
- Injection at full load 2 maps
- Injection base map 2 maps
- Lambda for component protection
- Limiter of Lambda A
- Limiter of Lambda B
- Requested Lambda 4 maps
Deactivations 4 maps
- Deactivation turbocharger protection (1=ON, 0=OFF) 2 maps
- Lambda Sensor (1=ON, 0=OFF) 2 maps
What you get
What is in our map packs. Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values, ready to read. Tuning maps only — no maps for switching off emission systems or errors.
Questions
What is a WinOLS mappack?
The definitions of the maps in one ECU software version — name, category, size, axes and position — exported from WinOLS as a CSV. It is not a DAMOS or A2L file and holds no tuned values.
Will it fit my ECU?
It is made for this software version: compare the HW / SW numbers above with your read.
Why €70?
Our map-pack prices, the original file included: cars €60 when the ECU type came out before 2012, €70 from 2012 on; motorcycles and boats €80; trucks and agricultural machinery €90.
Refunds?
All sales are final — check the numbers and the map list before you buy.
Need a map pack for another file?
Write to us on WhatsApp — we will tell you whether we can make one for your file and what it costs.
All Siemens SIMOS 18 mappacks · This original file · Search all mappacks