Magneti Marelli MM11GF WinOLS mappack
Fiat Panda
- One ZIP by e-mail: the original .bin + the .csv mappack for WinOLS — it imports just like a .kp map pack
- Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values
- Every map of the export is included — each map's name is listed below
- Axes checked against this exact original for all 70 maps
- No account — your e-mail and a card
- Check the HW / SW above against your read — all sales are final
E-mailed usually within a minute · your card is charged only when the ZIP is ready
Engine Torque 32 maps
- Limiter of Maximum torque 9 maps
- Limiter of Maximum torque f(APS)
- Maximum torque limiter f(ECT)
- Optimal engine torque
- Torque request during standard condition 13 maps
- Torque request during take off condition 7 maps
Spark Advance 23 maps
- Minimum Spark Advance 13 maps
- Spark advance base map 10 maps
Injection System 9 maps
- Injection base map 9 maps
Limiters 5 maps
- Idle engine speed
- Maximum speed of vehicle 2 maps
- RPM Limiter 2 maps
Air Control 1 map
- Throttle valve - operating angle
Is this my file?
Compare these numbers with your ECU read: this map pack is made for this software version.
- Vehicle
- Fiat Panda 1.0 69hp
- ECU
- Magneti Marelli MM11GF
Example map from this packTorque request during standard condition · 16 × 16 · read from this very original
Torque request during standard condition
16 × 16 · X axis: % · Y axis: Engine speed, rpm · values in %
| % →rpm ↓ | 0 | 1 | 2 | 4 | 8 | 10 | 15 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 110 | 0.0 | 0.8 | 3.8 | 5.4 | 10.5 | 13.9 | 20.9 | 33.6 | 54.7 | 80.2 | 85.7 | 88.9 | 95.2 | 100.0 | 100.0 | 100.0 |
| 700 | −1.6 | −1.5 | 1.2 | 3.2 | 8.3 | 11.4 | 17.6 | 29.8 | 50.6 | 79.2 | 90.1 | 91.2 | 98.4 | 100.0 | 100.0 | 100.0 |
| 800 | −3.3 | −3.1 | 0.1 | 2.1 | 6.9 | 10.1 | 16.9 | 28.7 | 48.4 | 78.8 | 90.1 | 93.1 | 100.0 | 100.0 | 100.0 | 100.0 |
| 1200 | −4.7 | −4.0 | −0.6 | 1.4 | 5.9 | 9.3 | 16.4 | 28.2 | 47.8 | 78.4 | 90.1 | 95.2 | 100.0 | 100.0 | 100.0 | 100.0 |
| 1400 | −7.4 | −4.9 | −1.5 | 0.6 | 5.1 | 8.2 | 15.9 | 27.6 | 46.8 | 77.9 | 90.6 | 97.6 | 100.0 | 100.0 | 100.0 | 100.0 |
| 1700 | −8.8 | −5.4 | −1.9 | 0.4 | 4.8 | 7.9 | 15.7 | 27.2 | 46.4 | 77.8 | 91.0 | 99.2 | 100.0 | 100.0 | 100.0 | 100.0 |
| 2000 | −9.4 | −5.7 | −2.3 | 0.0 | 4.5 | 7.6 | 15.5 | 26.9 | 46.2 | 77.6 | 91.7 | 99.2 | 100.0 | 100.0 | 100.0 | 100.0 |
| 2550 | −9.9 | −6.3 | −3.3 | −0.9 | 3.8 | 7.1 | 14.9 | 26.2 | 46.1 | 77.2 | 93.6 | 99.2 | 100.0 | 100.0 | 100.0 | 100.0 |
| 2700 | −10.0 | −6.6 | −3.8 | −1.4 | 3.5 | 6.6 | 14.7 | 25.8 | 46.8 | 77.1 | 94.8 | 100.0 | 100.0 | 100.0 | 100.0 | 100.0 |
| 3200 | −10.2 | −6.9 | −4.4 | −1.8 | 3.1 | 6.2 | 14.4 | 25.4 | 47.1 | 76.7 | 95.6 | 100.0 | 100.0 | 100.0 | 100.0 | 100.0 |
| 3600 | −10.4 | −7.6 | −5.5 | −3.0 | 2.3 | 5.6 | 13.9 | 24.9 | 48.7 | 76.2 | 96.8 | 100.0 | 100.0 | 100.0 | 100.0 | 100.0 |
| 4000 | −10.8 | −8.2 | −6.4 | −4.0 | 1.5 | 5.0 | 13.4 | 24.3 | 50.1 | 75.6 | 97.2 | 100.0 | 100.0 | 100.0 | 100.0 | 100.0 |
| 4400 | −10.9 | −8.6 | −6.8 | −4.4 | 1.1 | 4.6 | 13.1 | 23.9 | 50.6 | 75.4 | 97.1 | 100.0 | 100.0 | 100.0 | 100.0 | 100.0 |
| 5000 | −11.4 | −8.9 | −7.4 | −5.1 | 0.4 | 3.9 | 12.4 | 23.6 | 50.7 | 74.8 | 96.6 | 100.0 | 100.0 | 100.0 | 100.0 | 100.0 |
| 5400 | −11.9 | −9.3 | −8.0 | −5.6 | −0.1 | 3.2 | 11.8 | 23.1 | 50.1 | 74.4 | 95.8 | 100.0 | 100.0 | 100.0 | 100.0 | 100.0 |
| 5800 | −12.1 | −9.4 | −8.2 | −5.9 | −0.4 | 2.7 | 11.2 | 21.9 | 48.9 | 73.8 | 94.8 | 100.0 | 100.0 | 100.0 | 100.0 | 100.0 |
Swipe the table sideways to see every column.
One of 70 maps in this pack, read from this original file. Every other map is named in the list above.
What you get
What is in our map packs. Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values, ready to read. Every map of the export is included, listed by category — you see each map's name before you buy.
Questions
What is a WinOLS mappack?
The definitions of the maps in one ECU software version — name, category, size, axes and position — exported from WinOLS as a CSV. It is not a DAMOS or A2L file and holds no tuned values.
Will it fit my ECU?
It is made for this software version: compare the HW / SW numbers above with your read.
Why €70?
Our map-pack prices, the original file included: cars €60 when the ECU type came out before 2012, €70 from 2012 on; motorcycles and boats €80; trucks and agricultural machinery €90.
Refunds?
All sales are final — check the numbers and the map list before you buy.
All Fiat Panda map packs · All Magneti Marelli MM11GF mappacks · Search all mappacks