MJ8F3HW2FP 2841D445 Magneti Marelli MJ8F3 WinOLS mappack
Opel Combo
- One ZIP by e-mail: the original .bin + the .csv mappack for WinOLS — it imports just like a .kp map pack
- Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values
- Every map of the export is included — each map's name is listed below
- Axes checked against this exact original for all 42 maps
- No account — your e-mail and a card
- Check the HW / SW above against your read — all sales are final
E-mailed usually within a minute · your card is charged only when the ZIP is ready
Engine Torque 17 maps
- Limiter of Maximum torque 5 maps
- Limiter of Maximum torque f(APS)
- Maximum torque for fifth gear
- Maximum torque for first gear
- Maximum torque for forth gear
- Maximum torque for second gear
- Maximum torque for third gear
- Optimal engine torque 3 maps
- Torque during cranking f(RPM,ECT)
- Torque request during standard condition
- Torque request during take off condition
Injection System 13 maps
- Fuel quantity injected f(RPM,Trq)
- Fuel quantity limiter 2 maps
- Injection timing - Main Injection Base Map 1 3 maps
- Phase of injection 4 maps
- Smoke limitation - Lower Lambda value 3 maps
Turbo System 7 maps
- Limiter of Turbo pressure f(APS)
- Turbo pressure 2 maps
- Variable Geometry Duty Cycle 4 maps
Rail 4 maps
- Rail pressure 2 maps
- Rail pressure limiter f(RPM,Fuel_Q) 2 maps
Air Control 1 map
- Air quantity - Base map
Is this my file?
Compare these numbers with your ECU read: this map pack is made for this software version.
- HW
- MJ8F3HW2FP
- SW
- 2841D445
- Vehicle
- Opel Combo 1.3 90hp
- ECU
- Magneti Marelli MJ8F3
Not your software version? Other versions on HW MJ8F3HW2FP 10
| Version | Vehicle | |
|---|---|---|
| UPG 2841D448 | Fiat Doblo II1.3 90hp | Map pack · 42 maps · €60 |
| 3043D404 | Fiat Doblo II1.3 MJET 95hp | Map pack · 42 maps · €60 |
| 3043D504 | Fiat Doblo II1.3 MJET 95hp | Map pack · 42 maps · €60 |
| UPG 3044D405 | Fiat Doblo II1.3 MJET 95hp | Map pack · 42 maps · €60 |
| 304BD412 | Fiat Doblo II1.3 MJET 95hp | Map pack · 42 maps · €60 |
| CAL 3044DD05 | Fiat 5001.3 MJET 95hp | Original file |
| 304BDA12 | Fiat Doblo II1.3 MJET 95hp | Original file |
| 3044DA05 | Fiat Doblo II1.3 MJET 95hp | Original file |
| 3044D505 | Fiat Doblo II1.3 MJET 95hp | Original file |
| 3044DB05 | Fiat 5001.3 MJET 95hp | Original file |
Example map from this packInjection timing - Main Injection Base Map 1 · 16 × 16 · read from this very original
Injection timing - Main Injection Base Map 1
16 × 16 · X axis: Engine speed, rpm · Y axis: Fuel per stroke, mm³/st · values in °
| rpm →mm³/st ↓ | 833 | 882 | 938 | 1000 | 1071 | 1154 | 1250 | 1364 | 1500 | 1667 | 1875 | 2143 | 2500 | 3000 | 3750 | 4688 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 | 20.1 | 17.4 | 15.0 | 13.8 | 12.0 | 10.8 | 9.3 | 7.8 | 6.3 | 5.1 | 4.5 | 3.9 | 3.3 | 2.7 | 1.8 | 0.9 |
| 4 | 20.1 | 17.4 | 15.0 | 13.8 | 12.0 | 10.8 | 9.3 | 7.8 | 6.3 | 5.1 | 4.5 | 3.9 | 3.3 | 2.7 | 1.8 | 0.9 |
| 8 | 20.1 | 17.4 | 15.0 | 13.8 | 12.0 | 10.8 | 9.3 | 7.8 | 6.3 | 5.1 | 4.5 | 3.9 | 3.3 | 2.7 | 1.8 | 0.9 |
| 10 | 20.1 | 17.4 | 15.0 | 13.8 | 12.0 | 10.8 | 9.3 | 7.8 | 6.3 | 5.1 | 4.5 | 3.9 | 3.3 | 2.7 | 1.8 | 1.2 |
| 12 | 20.1 | 17.4 | 15.0 | 13.8 | 12.0 | 10.8 | 8.7 | 7.8 | 6.3 | 5.1 | 4.5 | 3.9 | 3.3 | 2.7 | 1.8 | 1.5 |
| 14 | 20.1 | 17.4 | 15.0 | 13.8 | 12.0 | 10.8 | 8.7 | 7.2 | 5.7 | 4.8 | 4.2 | 3.6 | 3.0 | 2.7 | 1.8 | 1.5 |
| 16 | 20.7 | 17.4 | 15.0 | 13.8 | 12.0 | 10.8 | 8.4 | 7.2 | 5.7 | 4.8 | 4.2 | 3.6 | 2.7 | 2.4 | 1.8 | 1.5 |
| 18 | 21.3 | 18.0 | 15.0 | 13.8 | 12.0 | 10.8 | 8.4 | 6.9 | 5.7 | 4.2 | 3.6 | 3.0 | 2.7 | 2.4 | 1.8 | 1.5 |
| 20 | 22.2 | 18.9 | 15.9 | 13.8 | 12.0 | 10.8 | 8.4 | 6.6 | 5.4 | 3.9 | 3.6 | 3.0 | 2.4 | 2.4 | 2.1 | 2.1 |
| 22 | 23.1 | 19.2 | 16.8 | 14.1 | 12.6 | 11.1 | 8.4 | 6.6 | 5.1 | 3.9 | 3.3 | 2.7 | 2.1 | 2.1 | 2.1 | 2.1 |
| 26 | 26.1 | 21.6 | 18.0 | 15.6 | 13.5 | 12.3 | 8.7 | 6.9 | 5.1 | 3.9 | 3.3 | 2.7 | 2.1 | 2.1 | 2.1 | 2.1 |
| 30 | 26.1 | 21.9 | 19.2 | 16.5 | 14.4 | 13.5 | 9.6 | 8.4 | 5.4 | 4.2 | 3.3 | 2.7 | 2.1 | 2.1 | 2.1 | 2.1 |
| 35 | 26.1 | 22.5 | 20.1 | 16.8 | 15.0 | 14.1 | 12.3 | 9.0 | 6.6 | 4.8 | 3.6 | 2.4 | 1.5 | 2.1 | 2.1 | 2.1 |
| 40 | 26.1 | 22.5 | 20.4 | 18.3 | 16.5 | 15.3 | 13.8 | 11.4 | 9.0 | 5.7 | 3.6 | 2.1 | 0.6 | 2.1 | 2.1 | 2.1 |
| 45 | 26.1 | 22.5 | 20.4 | 18.3 | 16.5 | 15.3 | 13.8 | 11.4 | 9.9 | 5.7 | 3.6 | 2.1 | 0.6 | 2.1 | 2.1 | 2.1 |
| 50 | 26.1 | 22.5 | 20.4 | 18.3 | 16.5 | 15.3 | 13.8 | 11.4 | 9.9 | 5.7 | 3.6 | 2.1 | 0.6 | 2.1 | 2.1 | 2.1 |
Swipe the table sideways to see every column.
One of 42 maps in this pack, read from this original file. Every other map is named in the list above.
What you get
What is in our map packs. Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values, ready to read. Every map of the export is included, listed by category — you see each map's name before you buy.
Questions
What is a WinOLS mappack?
The definitions of the maps in one ECU software version — name, category, size, axes and position — exported from WinOLS as a CSV. It is not a DAMOS or A2L file and holds no tuned values.
Will it fit my ECU?
It is made for this software version: compare the HW / SW numbers above with your read.
Why €60?
Our map-pack prices, the original file included: cars €60 when the ECU type came out before 2012, €70 from 2012 on; motorcycles and boats €80; trucks and agricultural machinery €90.
Refunds?
All sales are final — check the numbers and the map list before you buy.
All Opel Combo map packs · All Magneti Marelli MJ8F3 mappacks · This original file · Search all mappacks