F1FA-14C204-DM FV41-12A650-TM Delphi DCM6.1 WinOLS mappack
Ford Focus ST
- One ZIP by e-mail: the original .bin + the .csv mappack for WinOLS — it imports just like a .kp map pack
- Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values
- Every map of the export is included — each map's name is listed below
- Axes checked against this exact original for all 238 maps
- No account — your e-mail and a card
- Check the HW / SW above against your read — all sales are final
E-mailed usually within a minute · your card is charged only when the ZIP is ready
Injection System 106 maps
- Fuel quantity injected f(RPM,Trq) 35 maps
- Injection time
- Injection timing - Main Injection Base Map 1 23 maps
- Injection timing - Main Injection Base Map 2 34 maps
- Injection timing limiter - Main injection base map 3 maps
- Smoke limitation - Lower Lambda value 10 maps
Engine Torque 64 maps
- Calculated engine torque 17 maps
- Engine torque correction
- Engine torque correction in regeneration mode
- Limiter of Maximum torque 18 maps
- Limiter of Maximum torque f(APS)
- Maximum engine torque correction f(EGT_T)
- Maximum engine torque correction f(eng_T)
- Maximum engine torque correction f(fuel_T)
- Maximum engine torque correction f(oil_T)
- Maximum torque for fifth gear
- Maximum torque for first gear
- Maximum torque for forth gear
- Maximum torque for reverse gear
- Maximum torque for second gear
- Maximum torque for sixth gear 2 maps
- Maximum torque for third gear
- Torque during cranking f(RPM,ECT) 4 maps
- Torque monitoring 2 maps
- Torque request during standard condition
- Torque request during take off condition 7 maps
Turbo System 33 maps
- Limiter of Turbo pressure 7 maps
- Limiter of Turbo pressure f(APS) 3 maps
- Turbo pressure 11 maps
- Variable Geometry Duty Cycle 12 maps
Rail 17 maps
- Rail pressure 11 maps
- Rail pressure limiter f(RPM,Fuel_Q)
- Rail pressure limiter f(RPM,Fuel_T) 5 maps
Air Control 9 maps
- Air quantity - Base map 9 maps
Deactivations 6 maps
- EGR Valve 6 maps
Limiters 3 maps
- Idle engine speed f(ECT) 2 maps
- Maximum speed of vehicle
Is this my file?
Compare these numbers with your ECU read: this map pack is made for this software version.
- HW
- F1FA-14C204-DM
- SW
- FV41-12A650-TM
- CAL
- F1FA-14C204-DMF
- Vehicle
- Ford Focus ST 2.0 185hp
- ECU
- Delphi DCM6.1
Example map from this packInjection timing - Main Injection Base Map 1 · 16 × 16 · read from this very original
Injection timing - Main Injection Base Map 1
16 × 16 · X axis: Torque, Nm · Y axis: Engine speed, rpm · values in °
| Nm →rpm ↓ | 50 | 80 | 110 | 140 | 170 | 200 | 230 | 260 | 290 | 320 | 350 | 380 | 410 | 440 | 470 | 500 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 9.61 | 9.85 | 9.85 | 10.08 | 10.08 | 10.31 | 10.55 | 10.78 | 11.25 |
| 100 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 9.61 | 9.85 | 9.85 | 10.08 | 10.08 | 10.31 | 10.55 | 10.78 | 11.25 |
| 200 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 9.61 | 9.85 | 9.85 | 10.31 | 10.78 | 11.02 | 11.25 | 11.49 | 11.96 |
| 300 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 9.61 | 9.85 | 10.31 | 11.02 | 11.49 | 11.72 | 11.96 | 12.19 | 12.66 |
| 400 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 9.61 | 10.31 | 11.02 | 11.72 | 12.19 | 12.42 | 12.66 | 12.89 | 13.36 |
| 500 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 10.31 | 11.02 | 11.72 | 12.42 | 12.89 | 13.13 | 13.36 | 13.60 | 14.06 |
| 600 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 10.08 | 11.02 | 11.72 | 12.42 | 13.13 | 13.60 | 13.83 | 14.06 | 14.30 | 14.77 |
| 700 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 9.38 | 10.78 | 11.72 | 12.42 | 13.13 | 13.83 | 14.30 | 14.53 | 14.77 | 15.00 | 15.47 |
| 800 | 9.38 | 9.38 | 9.38 | 9.85 | 10.31 | 11.02 | 11.49 | 12.42 | 13.13 | 13.83 | 14.53 | 15.00 | 15.24 | 15.47 | 15.71 | 16.17 |
| 900 | 9.38 | 9.38 | 9.38 | 9.85 | 10.31 | 11.02 | 11.49 | 12.42 | 13.13 | 13.83 | 14.53 | 15.00 | 15.24 | 15.47 | 15.71 | 16.17 |
| 1000 | 9.38 | 9.38 | 9.38 | 9.85 | 10.31 | 11.02 | 11.49 | 12.42 | 13.13 | 13.83 | 14.53 | 15.00 | 15.24 | 15.47 | 15.71 | 16.17 |
| 1100 | 9.38 | 9.38 | 9.38 | 9.85 | 10.31 | 11.02 | 11.49 | 12.42 | 13.13 | 13.83 | 14.53 | 15.00 | 15.24 | 15.47 | 15.71 | 16.17 |
| 1200 | 9.38 | 9.38 | 9.38 | 9.85 | 10.31 | 11.02 | 11.49 | 12.42 | 13.13 | 13.83 | 14.53 | 15.00 | 15.24 | 15.47 | 15.71 | 16.17 |
| 1300 | 9.38 | 9.38 | 9.38 | 9.85 | 10.31 | 11.02 | 11.49 | 12.42 | 13.13 | 13.83 | 14.53 | 15.00 | 15.24 | 15.47 | 15.71 | 16.17 |
| 1400 | 9.38 | 9.38 | 9.38 | 9.85 | 10.31 | 11.02 | 11.49 | 12.42 | 13.13 | 13.83 | 14.53 | 15.00 | 15.24 | 15.47 | 15.71 | 16.17 |
| 1500 | 9.38 | 9.38 | 9.38 | 9.85 | 10.31 | 11.02 | 11.49 | 12.42 | 13.13 | 13.83 | 14.53 | 15.00 | 15.24 | 15.47 | 15.71 | 16.17 |
Swipe the table sideways to see every column.
One of 238 maps in this pack, read from this original file. Every other map is named in the list above.
What you get
What is in our map packs. Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values, ready to read. Every map of the export is included, listed by category — you see each map's name before you buy.
Questions
What is a WinOLS mappack?
The definitions of the maps in one ECU software version — name, category, size, axes and position — exported from WinOLS as a CSV. It is not a DAMOS or A2L file and holds no tuned values.
Will it fit my ECU?
It is made for this software version: compare the HW / SW numbers above with your read.
Why €70?
Our map-pack prices, the original file included: cars €60 when the ECU type came out before 2012, €70 from 2012 on; motorcycles and boats €80; trucks and agricultural machinery €90.
Refunds?
All sales are final — check the numbers and the map list before you buy.
All Delphi DCM6.1 mappacks · This original file · Search all mappacks