P045V82 Bosch MS6.2 WinOLS mappack
Scania R380 · DC 11 04 - L01
- One ZIP by e-mail: the original .bin + the .csv mappack for WinOLS — it imports just like a .kp map pack
- Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values
- Every map of the export is included — each map's name is listed below
- Axes checked against this exact original for all 19 maps
- No account — your e-mail and a card
- Check the HW / SW above against your read — all sales are final
E-mailed usually within a minute · your card is charged only when the ZIP is ready
Injection System 17 maps
- Fuel quantity limiter 10 maps
- Injection time 5 maps
- Phase of injection 2 maps
Engine Torque 2 maps
- Torque during cranking f(RPM,ECT)
- Torque request during take off condition
Is this my file?
Compare these numbers with your ECU read: this map pack is made for this software version.
- SW
- P045V82
- Vehicle
- Scania R380 106 380hp
- Engine code
- DC 11 04 - L01
- ECU
- Bosch MS6.2
Example map from this packFuel quantity limiter · 12 × 12 · read from this very original
Fuel quantity limiter
12 × 12 · X axis: Engine speed, rpm · Y axis: Pressure, hPa · values in mg/st
| rpm →hPa ↓ | 2180 | 1800 | 1600 | 1400 | 1200 | 1000 | 800 | 600 | 490 | 470 | 1 | 0 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2400 | 267.0 | 254.7 | 250.1 | 243.4 | 247.8 | 251.9 | 252.2 | 252.4 | 252.4 | 252.4 | 252.4 | 252.4 |
| 2200 | 218.5 | 200.0 | 227.0 | 236.0 | 247.0 | 251.9 | 252.2 | 252.4 | 229.0 | 229.0 | 229.0 | 229.0 |
| 2000 | 195.2 | 181.5 | 211.0 | 227.0 | 244.0 | 249.0 | 248.5 | 246.5 | 219.0 | 218.5 | 219.0 | 218.5 |
| 1800 | 87.8 | 160.0 | 169.5 | 174.5 | 184.5 | 199.1 | 217.5 | 217.0 | 207.0 | 207.0 | 207.0 | 207.0 |
| 1600 | 78.1 | 136.0 | 149.5 | 153.0 | 152.0 | 170.5 | 209.0 | 207.0 | 189.0 | 189.5 | 189.0 | 189.5 |
| 1400 | 70.9 | 115.5 | 122.0 | 119.5 | 118.0 | 130.0 | 166.5 | 162.0 | 162.0 | 161.5 | 162.0 | 161.5 |
| 1200 | 69.1 | 98.0 | 95.0 | 95.0 | 98.0 | 111.0 | 138.0 | 148.5 | 148.0 | 148.0 | 148.0 | 148.0 |
| 1100 | 67.1 | 79.0 | 82.0 | 93.5 | 96.0 | 105.5 | 129.5 | 139.5 | 140.0 | 139.5 | 140.0 | 139.5 |
| 1000 | 65.2 | 72.5 | 65.0 | 75.0 | 81.5 | 93.5 | 113.5 | 122.0 | 121.5 | 121.5 | 121.5 | 121.5 |
| 900 | 59.4 | 62.0 | 60.5 | 60.5 | 73.5 | 90.0 | 80.0 | 80.5 | 95.5 | 94.5 | 96.2 | 97.0 |
| 2 | 59.0 | 62.0 | 62.5 | 63.5 | 65.5 | 70.0 | 80.0 | 95.0 | 95.0 | 94.2 | 95.5 | 94.5 |
| 0 | 58.4 | 62.0 | 62.5 | 63.5 | 65.5 | 70.0 | 80.0 | 95.0 | 95.0 | 94.2 | 95.0 | 94.2 |
Swipe the table sideways to see every column.
One of 19 maps in this pack, read from this original file. Every other map is named in the list above.
What you get
What is in our map packs. Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values, ready to read. Every map of the export is included, listed by category — you see each map's name before you buy.
Questions
What is a WinOLS mappack?
The definitions of the maps in one ECU software version — name, category, size, axes and position — exported from WinOLS as a CSV. It is not a DAMOS or A2L file and holds no tuned values.
Will it fit my ECU?
It is made for this software version: compare the HW / SW numbers above with your read.
Why €90?
Our map-pack prices, the original file included: cars €60 when the ECU type came out before 2012, €70 from 2012 on; motorcycles and boats €80; trucks and agricultural machinery €90.
Refunds?
All sales are final — check the numbers and the map list before you buy.
All Scania R380 map packs · All Bosch MS6.2 mappacks · Search all mappacks