Bosch MG1CS111 WinOLS mappack
Audi A5
- One ZIP by e-mail: the original .bin + the .csv mappack for WinOLS — it imports just like a .kp map pack
- Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values
- Every map of the export is included — each map's name is listed below
- Axes checked against this exact original for all 157 maps
- No account — your e-mail and a card
- Check the HW / SW above against your read — all sales are final
E-mailed usually within a minute · your card is charged only when the ZIP is ready
Spark Advance 49 maps
- Limiter of knocking sensor 4 maps
- Minimum Spark Advance 13 maps
- Optimal Spark Advance 16 maps
- Spark Advance base map 16 maps
Engine Torque 41 maps
- Limiter of Maximum torque 11 maps
- Maximum engine torque correction f(ECT_T) 7 maps
- Maximum torque limiter f(gear)
- Optimal engine torque
- Torque monitoring 2 maps
- Torque request during take off condition 19 maps
Turbo System 18 maps
- Ambient pressure threshold for charge pressure diagnostics
- Compressor efficiency
- Correction of turbo pressure f(IAT)
- Limiter of Turbo pressure 3 maps
- Limiter of Turbo pressure f(IAT) 2 maps
- Maximum turbocharger speed 2 maps
- Turbine efficiency 2 maps
- Turbo pressure 4 maps
- Wastegate Duty Cycle 2 maps
Injection System 18 maps
- Injection correction 9 maps
- Injection enrichment 3 maps
- Lambda for component protection 6 maps
Limiters 14 maps
- Maximum speed of vehicle 8 maps
- RPM Limiter 6 maps
Air Control 12 maps
- Airflow mass through throttle valve
- Engine load limiter 4 maps
- Exhaust gas temperature
- MAF sensor slope 3 maps
- Requested engine load
- Throttle valve - operating angle
- Volumetric efficiency
Rail 5 maps
- Rail pressure 5 maps
Is this my file?
Compare these numbers with your ECU read: this map pack is made for this software version.
- Vehicle
- Audi A5 2.0 190hp
- ECU
- Bosch MG1CS111
Example map from this packSpark Advance base map · 16 × 16 · read from this very original
Spark Advance base map
16 × 16 · X axis: Air charge, % · Y axis: Engine speed, rpm · values in °
| % →rpm ↓ | 10 | 15 | 19 | 30 | 40 | 60 | 80 | 100 | 115 | 130 | 145 | 175 | 180 | 185 | 190 | 195 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 500 | 21.0 | 12.8 | 8.3 | 5.3 | 0.8 | −0.8 | −11.3 | −15.0 | −15.0 | −15.0 | −15.0 | −15.0 | −15.0 | −15.0 | −15.0 | −15.0 |
| 720 | 21.8 | 13.5 | 9.0 | 6.0 | 1.5 | −0.8 | −11.3 | −15.0 | −15.0 | −15.0 | −15.0 | −15.0 | −15.0 | −15.0 | −15.0 | −15.0 |
| 1000 | 23.3 | 22.5 | 12.8 | 8.3 | 6.8 | −0.8 | −11.3 | −15.0 | −15.0 | −15.0 | −15.0 | −15.0 | −15.0 | −15.0 | −15.0 | −15.0 |
| 1240 | 25.5 | 17.3 | 13.5 | 9.8 | 7.5 | 4.5 | −6.0 | −11.3 | −15.0 | −15.0 | −15.0 | −15.0 | −15.0 | −15.0 | −15.0 | −15.0 |
| 1520 | 26.3 | 20.3 | 15.0 | 11.3 | 9.0 | 5.3 | −1.5 | −6.0 | −8.3 | −14.3 | −15.0 | −15.0 | −15.0 | −15.0 | −15.0 | −15.0 |
| 1760 | 27.0 | 21.0 | 16.5 | 12.0 | 9.8 | 8.3 | 3.8 | −2.3 | −4.5 | −7.5 | −9.8 | −12.8 | −12.8 | −12.8 | −12.8 | −12.8 |
| 2000 | 28.5 | 21.8 | 17.3 | 14.3 | 11.3 | 9.0 | 5.3 | 0.0 | −3.8 | −5.3 | −6.8 | −12.0 | −12.0 | −12.0 | −12.0 | −12.0 |
| 2520 | 30.0 | 24.0 | 19.5 | 15.8 | 14.3 | 10.5 | 8.3 | 3.0 | 0.8 | −2.3 | −3.0 | −10.5 | −10.5 | −10.5 | −10.5 | −10.5 |
| 3000 | 30.8 | 24.8 | 21.8 | 16.5 | 13.5 | 11.3 | 9.8 | 6.8 | 2.3 | 1.5 | 0.0 | −3.8 | −3.8 | −3.8 | −3.8 | −3.8 |
| 3520 | 31.5 | 24.8 | 21.8 | 16.5 | 15.0 | 12.8 | 12.0 | 9.8 | 5.3 | 4.5 | 3.0 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 |
| 4000 | 32.3 | 24.8 | 21.8 | 16.5 | 15.8 | 14.3 | 12.0 | 11.3 | 9.0 | 6.8 | 3.0 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| 4520 | 31.5 | 29.3 | 23.3 | 20.3 | 18.8 | 16.5 | 14.3 | 14.3 | 10.5 | 8.3 | 3.0 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| 5000 | 33.8 | 31.5 | 25.5 | 20.3 | 18.8 | 17.3 | 15.0 | 14.3 | 10.5 | 8.3 | 3.0 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| 5520 | 36.0 | 33.0 | 29.3 | 24.0 | 21.0 | 18.8 | 17.3 | 15.0 | 10.5 | 8.3 | 3.0 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| 6000 | 36.0 | 33.8 | 30.8 | 25.5 | 21.8 | 20.3 | 18.0 | 16.5 | 11.3 | 9.0 | 3.8 | 2.3 | 2.3 | 2.3 | 2.3 | 2.3 |
| 6500 | 36.8 | 34.5 | 31.5 | 26.3 | 22.5 | 21.0 | 18.8 | 17.3 | 12.0 | 9.8 | 4.5 | 3.0 | 3.0 | 3.0 | 3.0 | 3.0 |
Swipe the table sideways to see every column.
One of 157 maps in this pack, read from this original file. Every other map is named in the list above.
What you get
What is in our map packs. Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values, ready to read. Every map of the export is included, listed by category — you see each map's name before you buy.
Questions
What is a WinOLS mappack?
The definitions of the maps in one ECU software version — name, category, size, axes and position — exported from WinOLS as a CSV. It is not a DAMOS or A2L file and holds no tuned values.
Will it fit my ECU?
It is made for this software version: compare the HW / SW numbers above with your read.
Why €70?
Our map-pack prices, the original file included: cars €60 when the ECU type came out before 2012, €70 from 2012 on; motorcycles and boats €80; trucks and agricultural machinery €90.
Refunds?
All sales are final — check the numbers and the map list before you buy.
All Audi A5 map packs · All Bosch MG1CS111 mappacks · Search all mappacks