Bosch MEVD17.2.3 WinOLS mappack
Mini ONE
- One ZIP by e-mail: the original .bin + the .csv mappack for WinOLS — it imports just like a .kp map pack
- Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values
- Every map of the export is included — each map's name is listed below
- Axes checked against this exact original: 195 of 202 axes match this file
- No account — your e-mail and a card
- Check the HW / SW above against your read — all sales are final
E-mailed usually within a minute · your card is charged only when the ZIP is ready
Engine Torque 36 maps
- Engine torque correction
- Limiter of Maximum torque 17 maps
- Maximum engine torque correction f(ECT_T)
- Optimal engine torque 2 maps
- Torque limiter for vehicle speed
- Torque request during standard condition 8 maps
- Torque request during take off condition - Automatic Transmission 4 maps
- Torque request for Sport mode functionality A
- Torque request for Sport mode functionality B
Variable Valve Timing (VVT) 34 maps
- Exhaust 6 maps
- Exhaust - High speed 7 maps
- Exhaust - Low speed
- Intake 16 maps
- Intake - High speed 2 maps
- Intake - Low speed 2 maps
Turbo System 24 maps
- Limiter of Turbo pressure 8 maps
- Limiter of Turbo pressure f(IAT)
- Limiter of differential Turbo pressure f(APS) 4 maps
- Overboost duration 2 maps
- Turbine efficiency
- Wastegate Duty Cycle 8 maps
Air Control 17 maps
- Airflow mass through throttle valve
- Engine load limiter 7 maps
- Exhaust gas temperature 3 maps
- MAF sensor slope 4 maps
- MAP sensor slope
- Reference of maximum throttle valve angle
Injection System 15 maps
- Injection at full load 2 maps
- Injection base map
- Injection correction 2 maps
- Injection enrichment 2 maps
- Lambda for component protection 4 maps
- Requested Lambda 4 maps
Spark Advance 12 maps
- Limiter of knocking sensor 3 maps
- Optimal Spark Advance 4 maps
- Spark Advance base map 5 maps
Limiters 10 maps
- Maximum speed of vehicle 4 maps
- Maximum speed of vehicle A
- Maximum speed of vehicle B
- RPM Limiter 4 maps
Deactivations 5 maps
- Catalytic converter Diagnosis (1=ON, 0=OFF)
- Lambda Sensor (1=ON, 0=OFF) 4 maps
Rail 4 maps
- Rail pressure 3 maps
- Rail pressure limiter f(RPM,Fuel_Q)
Is this my file?
Compare these numbers with your ECU read: this map pack is made for this software version.
- Vehicle
- Mini ONE 1.2 102hp
- ECU
- Bosch MEVD17.2.3
Example map from this packRequested Lambda · 10 × 10 · read from this very original
Requested Lambda
10 × 10 · X axis: Engine speed, rpm · Y axis: Torque, Nm · values in lambda
| rpm →Nm ↓ | 500 | 750 | 1000 | 1500 | 2000 | 3000 | 4000 | 5000 | 6000 | 6950 |
|---|---|---|---|---|---|---|---|---|---|---|
| 20 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 |
| 40 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 |
| 60 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 |
| 80 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 |
| 100 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 0.97 |
| 120 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 0.94 |
| 140 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 0.91 | 0.89 |
| 160 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 0.93 | 0.88 | 0.84 |
| 180 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 0.93 | 0.92 | 0.86 | 0.83 |
| 200 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 0.92 | 0.90 | 0.85 | 0.81 |
Swipe the table sideways to see every column.
One of 157 maps in this pack, read from this original file. Every other map is named in the list above.
What you get
What is in our map packs. Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values, ready to read. Every map of the export is included, listed by category — you see each map's name before you buy.
Questions
What is a WinOLS mappack?
The definitions of the maps in one ECU software version — name, category, size, axes and position — exported from WinOLS as a CSV. It is not a DAMOS or A2L file and holds no tuned values.
Will it fit my ECU?
It is made for this software version: compare the HW / SW numbers above with your read.
Why €70?
Our map-pack prices, the original file included: cars €60 when the ECU type came out before 2012, €70 from 2012 on; motorcycles and boats €80; trucks and agricultural machinery €90.
Refunds?
All sales are final — check the numbers and the map list before you buy.
All Mini ONE map packs · All Bosch MEVD17.2.3 mappacks · Search all mappacks