Bosch EDG16C33 WinOLS mappack
Smart Forfour
- One ZIP by e-mail: the original .bin + the .csv mappack for WinOLS — it imports just like a .kp map pack
- Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values
- Every map of the export is included — each map's name is listed below
- Axes checked against this exact original for all 37 maps
- No account — your e-mail and a card
- Check the HW / SW above against your read — all sales are final
E-mailed usually within a minute · your card is charged only when the ZIP is ready
Engine Torque 11 maps
- Limiter of Maximum torque 2 maps
- Maximum torque for fifth gear
- Maximum torque for first gear
- Maximum torque for forth gear
- Maximum torque for reverse gear
- Maximum torque for second gear
- Maximum torque for sixth gear
- Maximum torque for third gear
- Torque during cranking f(RPM,ECT)
- Torque request during standard condition
Injection System 9 maps
- Fuel quantity injected f(RPM,Trq)
- Fuel quantity limiter 3 maps
- Injection correction f(ECT)
- Injection timing - Main Injection Base Map 1
- Injection timing - Main Injection Base Map 2
- Injection timing - Main Injection Base Map 3
- Phase of injection
Turbo System 6 maps
- Correction of turbo pressure f(IAT)
- Limiter of Turbo pressure
- Limiter of Turbo pressure f(APS) 2 maps
- Turbo pressure
- Variable geometry (VGT) or wastegate (WG) control
Rail 5 maps
- Rail pressure
- Rail pressure limiter f(RPM,Fuel_Q) 2 maps
- Rail pressure limiter f(RPM,Fuel_T) 2 maps
Air Control 3 maps
- Air quantity - Base map
- EGR control - Opening percentage 2 maps
Limiters 3 maps
- Idle engine speed f(ECT)
- RPM Limiter 2 maps
Is this my file?
Compare these numbers with your ECU read: this map pack is made for this software version.
- Vehicle
- Smart Forfour 1.5 90hp
- ECU
- Bosch EDG16C33
Example map from this packInjection timing - Main Injection Base Map 1 · 16 × 16 · read from this very original
Injection timing - Main Injection Base Map 1
16 × 16 · X axis: Fuel per stroke, mm³/st · Y axis: Engine speed, rpm · values in °
| mm³/st →rpm ↓ | 0 | 1 | 2 | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 400 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| 600 | 1.69 | 1.69 | 1.69 | 1.69 | 1.87 | 2.09 | 2.27 | 2.46 | 2.65 | 2.86 | 3.05 | 3.23 | 3.42 | 3.63 | 3.82 | 4.01 |
| 800 | 2.25 | 2.25 | 2.25 | 2.25 | 2.51 | 2.77 | 3.02 | 3.28 | 3.54 | 3.80 | 4.05 | 4.31 | 4.57 | 4.83 | 5.09 | 5.34 |
| 900 | 2.25 | 2.25 | 2.25 | 2.25 | 2.51 | 2.77 | 3.02 | 3.28 | 3.54 | 3.80 | 4.05 | 4.31 | 4.57 | 4.83 | 5.09 | 5.34 |
| 1000 | 2.25 | 2.25 | 2.25 | 2.25 | 2.51 | 2.77 | 3.02 | 3.28 | 3.54 | 3.80 | 4.05 | 4.31 | 4.57 | 4.83 | 5.09 | 5.34 |
| 1200 | 2.51 | 2.51 | 2.51 | 2.51 | 2.77 | 3.02 | 3.28 | 3.54 | 3.80 | 4.05 | 4.31 | 4.57 | 4.83 | 5.09 | 5.34 | 5.58 |
| 1400 | 2.84 | 2.84 | 2.84 | 2.84 | 3.09 | 3.35 | 3.61 | 3.87 | 4.12 | 4.38 | 4.64 | 4.90 | 5.16 | 5.41 | 5.67 | 5.93 |
| 1600 | 3.30 | 3.30 | 3.30 | 3.30 | 3.70 | 4.08 | 4.34 | 4.59 | 4.85 | 5.11 | 5.37 | 5.62 | 5.88 | 6.14 | 6.40 | 6.66 |
| 2000 | 4.99 | 4.99 | 4.99 | 4.99 | 5.51 | 5.86 | 6.28 | 6.54 | 6.80 | 7.05 | 7.31 | 7.57 | 7.83 | 8.09 | 8.34 | 8.60 |
| 2400 | 7.01 | 7.01 | 7.01 | 7.01 | 7.50 | 7.87 | 8.25 | 8.65 | 9.02 | 9.28 | 9.66 | 9.94 | 10.29 | 10.64 | 11.01 | 11.39 |
| 2800 | 9.00 | 9.00 | 9.00 | 9.00 | 9.49 | 10.01 | 10.50 | 10.99 | 11.51 | 12.00 | 12.49 | 13.01 | 13.50 | 13.97 | 14.51 | 15.00 |
| 3200 | 10.99 | 10.99 | 10.99 | 10.99 | 11.51 | 12.09 | 12.68 | 13.29 | 13.97 | 14.58 | 15.21 | 15.91 | 16.64 | 17.32 | 18.02 | 18.84 |
| 3600 | 13.01 | 13.01 | 13.01 | 13.01 | 13.50 | 14.25 | 15.00 | 15.73 | 16.50 | 17.25 | 18.00 | 19.01 | 19.76 | 20.74 | 21.49 | 22.50 |
| 4000 | 15.00 | 15.00 | 15.00 | 15.00 | 15.49 | 16.24 | 17.27 | 18.26 | 19.24 | 20.25 | 21.26 | 22.36 | 23.48 | 24.49 | 25.50 | 26.51 |
| 4400 | 16.50 | 16.50 | 16.50 | 16.50 | 16.99 | 18.00 | 19.24 | 20.51 | 21.75 | 22.99 | 24.26 | 25.76 | 26.83 | 28.01 | 29.25 | 30.49 |
| 4800 | 17.51 | 17.51 | 17.51 | 17.51 | 18.00 | 19.01 | 19.99 | 21.00 | 22.01 | 22.99 | 24.00 | 25.24 | 26.25 | 27.49 | 28.76 | 30.00 |
Swipe the table sideways to see every column.
One of 37 maps in this pack, read from this original file. Every other map is named in the list above.
What you get
What is in our map packs. Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values, ready to read. Every map of the export is included, listed by category — you see each map's name before you buy.
Questions
What is a WinOLS mappack?
The definitions of the maps in one ECU software version — name, category, size, axes and position — exported from WinOLS as a CSV. It is not a DAMOS or A2L file and holds no tuned values.
Will it fit my ECU?
It is made for this software version: compare the HW / SW numbers above with your read.
Why €60?
Our map-pack prices, the original file included: cars €60 when the ECU type came out before 2012, €70 from 2012 on; motorcycles and boats €80; trucks and agricultural machinery €90.
Refunds?
All sales are final — check the numbers and the map list before you buy.
All Smart Forfour map packs · All Bosch EDG16C33 mappacks · Search all mappacks