Bosch EDC16C8 WinOLS mappack
Alfa Romeo 156
- One ZIP by e-mail: the original .bin + the .csv mappack for WinOLS — it imports just like a .kp map pack
- Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values
- Every map of the export is included — each map's name is listed below
- Axes checked against this exact original for all 33 maps
- No account — your e-mail and a card
- Check the HW / SW above against your read — all sales are final
E-mailed usually within a minute · your card is charged only when the ZIP is ready
Engine Torque 11 maps
- Limiter of Maximum torque
- Maximum torque for fifth gear
- Maximum torque for first gear
- Maximum torque for forth gear
- Maximum torque for reverse gear
- Maximum torque for second gear
- Maximum torque for sixth gear
- Maximum torque for third gear
- Torque during cranking f(RPM,ECT)
- Torque request during standard condition
- Torque request during take off condition
Injection System 10 maps
- Fuel quantity injected f(RPM,Trq)
- Injection time
- Injection timing - Main Injection Base Map 1
- Injection timing - Main Injection Base Map 2
- Injection timing - Main Injection Base Map 3
- Injection timing - Main Injection Base Map 4
- Injection timing - Main Injection Base Map 5
- Smoke limitation - Higher Lambda value
- Smoke limitation - Lower Lambda value
- Smoke limitation - Lower Lambda value at full throttle
Turbo System 5 maps
- Limiter of Turbo pressure
- Limiter of Turbo pressure f(APS)
- Limiter of differential Turbo pressure f(APS)
- Turbo pressure
- Variable geometry (VGT) or wastegate (WG) control
Air Control 3 maps
- Gas quantity recirculation
- Percentage valve opening
- Valve opening Conversion (Duty Cycle)
Rail 3 maps
- Rail pressure
- Rail pressure limiter f(RPM,Fuel_Q)
- Rail pressure limiter f(RPM,Fuel_T)
Limiters 1 map
- Maximum speed of vehicle
Is this my file?
Compare these numbers with your ECU read: this map pack is made for this software version.
- Vehicle
- Alfa Romeo 156 1.9 JTD 16V 150hp
- ECU
- Bosch EDC16C8
Example map from this packFuel quantity injected f(RPM,Trq) · 16 × 16 · read from this very original
Fuel quantity injected f(RPM,Trq)
16 × 16 · X axis: Torque, Nm · Y axis: Engine speed, rpm · values in mm³/st
| Nm →rpm ↓ | 0 | 5 | 25 | 50 | 75 | 100 | 125 | 150 | 175 | 200 | 250 | 300 | 350 | 400 | 450 | 500 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 250 | 0.0 | 1.4 | 4.5 | 9.1 | 15.5 | 20.3 | 26.3 | 39.0 | 57.6 | 74.7 | 100.0 | 100.1 | 100.2 | 100.3 | 100.4 | 100.5 |
| 500 | 0.0 | 1.4 | 4.5 | 9.1 | 15.5 | 20.3 | 26.3 | 39.0 | 57.6 | 74.7 | 100.0 | 100.1 | 100.2 | 100.3 | 100.4 | 100.5 |
| 750 | 0.0 | 1.4 | 4.4 | 8.8 | 14.8 | 19.6 | 25.4 | 36.0 | 50.9 | 65.0 | 90.7 | 100.0 | 100.1 | 100.2 | 100.3 | 100.4 |
| 1000 | 0.0 | 1.4 | 4.3 | 8.5 | 14.0 | 18.9 | 24.4 | 33.0 | 44.2 | 55.3 | 77.6 | 100.0 | 100.1 | 100.2 | 100.3 | 100.4 |
| 1250 | 0.0 | 1.4 | 4.2 | 8.2 | 13.2 | 18.2 | 23.4 | 30.0 | 37.5 | 45.6 | 64.5 | 84.2 | 100.0 | 100.1 | 100.2 | 100.3 |
| 1500 | 0.0 | 1.4 | 4.1 | 7.9 | 12.5 | 17.5 | 22.5 | 27.6 | 32.8 | 39.5 | 54.2 | 68.7 | 83.1 | 97.6 | 100.0 | 100.1 |
| 1750 | 0.0 | 1.0 | 3.9 | 7.5 | 12.1 | 17.1 | 21.9 | 26.4 | 31.2 | 36.5 | 48.0 | 60.0 | 74.0 | 88.9 | 100.0 | 100.1 |
| 2000 | 0.0 | 0.7 | 3.7 | 7.0 | 11.7 | 16.8 | 21.2 | 26.0 | 31.0 | 35.8 | 45.4 | 55.6 | 68.7 | 83.9 | 100.0 | 100.1 |
| 2250 | 0.0 | 0.5 | 3.4 | 6.8 | 11.6 | 16.4 | 21.1 | 25.9 | 30.8 | 35.5 | 44.9 | 55.0 | 67.5 | 83.2 | 98.5 | 100.0 |
| 2500 | 0.0 | 0.4 | 3.0 | 6.7 | 11.4 | 16.1 | 20.9 | 25.8 | 30.5 | 35.2 | 44.4 | 54.4 | 67.1 | 82.4 | 97.8 | 100.0 |
| 2750 | 0.0 | 0.4 | 2.8 | 6.6 | 11.0 | 15.8 | 20.6 | 25.6 | 30.2 | 35.0 | 44.3 | 54.2 | 67.3 | 82.0 | 96.8 | 100.0 |
| 3000 | 0.0 | 0.4 | 2.6 | 6.5 | 10.6 | 15.4 | 20.3 | 25.3 | 30.0 | 34.7 | 44.2 | 54.1 | 67.5 | 81.7 | 95.9 | 100.0 |
| 3500 | 0.0 | 0.3 | 2.1 | 6.0 | 10.1 | 14.7 | 19.1 | 23.8 | 28.5 | 33.5 | 43.5 | 55.1 | 68.2 | 81.2 | 95.5 | 100.0 |
| 4000 | 0.0 | 0.3 | 2.4 | 6.0 | 10.1 | 14.7 | 19.1 | 23.9 | 28.7 | 33.7 | 44.5 | 57.1 | 70.4 | 83.7 | 97.0 | 100.0 |
| 4500 | 0.0 | 0.4 | 2.5 | 6.3 | 11.1 | 15.6 | 20.0 | 24.8 | 29.5 | 34.5 | 46.4 | 59.6 | 72.9 | 86.2 | 98.1 | 100.0 |
| 5000 | 0.0 | 0.4 | 2.5 | 6.3 | 11.1 | 15.6 | 20.0 | 24.8 | 29.5 | 34.5 | 46.4 | 59.6 | 72.9 | 86.2 | 99.4 | 100.0 |
Swipe the table sideways to see every column.
One of 33 maps in this pack, read from this original file. Every other map is named in the list above.
What you get
What is in our map packs. Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values, ready to read. Every map of the export is included, listed by category — you see each map's name before you buy.
Questions
What is a WinOLS mappack?
The definitions of the maps in one ECU software version — name, category, size, axes and position — exported from WinOLS as a CSV. It is not a DAMOS or A2L file and holds no tuned values.
Will it fit my ECU?
It is made for this software version: compare the HW / SW numbers above with your read.
Why €60?
Our map-pack prices, the original file included: cars €60 when the ECU type came out before 2012, €70 from 2012 on; motorcycles and boats €80; trucks and agricultural machinery €90.
Refunds?
All sales are final — check the numbers and the map list before you buy.
All Alfa Romeo 156 map packs · All Bosch EDC16C8 mappacks · Search all mappacks