10SW002521 6549037900 Bosch MD1CP001 WinOLS mappack
Mercedes C · OM654D20
- One ZIP by e-mail: the original .bin + the .csv mappack for WinOLS — it imports just like a .kp map pack
- Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values
- Every map of the export is included — each map's name is listed below
- Axes checked against this exact original for all 85 maps
- No account — your e-mail and a card
- Check the HW / SW above against your read — all sales are final
E-mailed usually within a minute · your card is charged only when the ZIP is ready
Turbo System 24 maps
- Compressor efficiency
- Correction of turbo pressure
- Limiter of Turbo pressure 3 maps
- Limiter of Turbo pressure f(APS)
- Limiter of Turbo pressure f(IAT) 5 maps
- Maximum Compressor temperature
- Maximum turbocharger speed 2 maps
- Maximum turbocharger temperature 3 maps
- Turbo pressure 5 maps
- Variable geometry (VGT) or wastegate (WG) control 2 maps
Rail 21 maps
- Rail pressure 4 maps
- Rail pressure limiter 16 maps
- Rail pressure limiter f(RPM,Fuel_T)
Injection System 20 maps
- Fuel quantity injected f(RPM,Trq) 3 maps
- Fuel quantity limiter
- Injection enrichment at full load
- Injection time
- Injection timing - Main Injection Base Map 1 6 maps
- Phase of injection
- Smoke limitation - Lower Lambda value 7 maps
Engine Torque 18 maps
- Limiter of Maximum torque 10 maps
- Maximum power limiter
- Maximum torque limiter f(fuel_T) 2 maps
- Maximum torque limiter f(gear) 2 maps
- Torque monitoring 3 maps
Air Control 2 maps
- Exhaust gas temperature 2 maps
Is this my file?
Compare these numbers with your ECU read: this map pack is made for this software version.
- HW
- 6549011600
- SW
- 10SW002521
- SW upgrade
- 6549037900
- Vehicle
- Mercedes C 1.6 122hp
- Engine code
- OM654D20
- ECU
- Bosch MD1CP001
Not your software version? Other versions on HW 6549011600 1
| Version | Vehicle | |
|---|---|---|
| UPG 6549037900 | Mercedes GLC2.0 170hp | Original file |
Example map from this packLimiter of Maximum torque · 8 × 8 · read from this very original
Limiter of Maximum torque
8 × 8 · X axis: Engine speed, rpm · Y axis: Fuel per stroke, mm³/st · values in Nm
| rpm →mm³/st ↓ | 0 | 400 | 800 | 1600 | 2000 | 2400 | 3200 | 4000 |
|---|---|---|---|---|---|---|---|---|
| 0 | 300 | 350 | 350 | 350 | 350 | 350 | 350 | 350 |
| 18 | 300 | 350 | 350 | 350 | 350 | 350 | 350 | 350 |
| 20 | 300 | 350 | 350 | 350 | 350 | 350 | 350 | 350 |
| 24 | 250 | 300 | 300 | 300 | 300 | 300 | 300 | 300 |
| 26 | 150 | 300 | 300 | 300 | 300 | 300 | 300 | 300 |
| 28 | 0 | 275 | 275 | 275 | 275 | 275 | 275 | 275 |
| 36 | 0 | 150 | 150 | 150 | 150 | 150 | 150 | 150 |
| 38 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Swipe the table sideways to see every column.
One of 85 maps in this pack, read from this original file. Every other map is named in the list above.
What you get
What is in our map packs. Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values, ready to read. Every map of the export is included, listed by category — you see each map's name before you buy.
Questions
What is a WinOLS mappack?
The definitions of the maps in one ECU software version — name, category, size, axes and position — exported from WinOLS as a CSV. It is not a DAMOS or A2L file and holds no tuned values.
Will it fit my ECU?
It is made for this software version: compare the HW / SW numbers above with your read.
Why €70?
Our map-pack prices, the original file included: cars €60 when the ECU type came out before 2012, €70 from 2012 on; motorcycles and boats €80; trucks and agricultural machinery €90.
Refunds?
All sales are final — check the numbers and the map list before you buy.
All Mercedes C map packs · All Bosch MD1CP001 mappacks · Search all mappacks