4L0910401M 0010 Bosch EDC16CP34 WinOLS mappack
Audi Q7
- One ZIP by e-mail: the original .bin + the .csv mappack for WinOLS — it imports just like a .kp map pack
- Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values
- Every map of the export is included — each map's name is listed below
- Axes checked against this exact original for all 69 maps
- No account — your e-mail and a card
- Check the HW / SW above against your read — all sales are final
E-mailed usually within a minute · your card is charged only when the ZIP is ready
Turbo System 20 maps
- Limiter of Turbo pressure f(APS)
- Turbo pressure 8 maps
- Variable Geometry Duty Cycle 11 maps
Air Control 15 maps
- Air quantity - Base map 12 maps
- EGR control - Opening percentage 3 maps
Engine Torque 14 maps
- Limiter of Maximum torque f(APS) 2 maps
- Maximum torque for fifth gear
- Maximum torque for first gear
- Maximum torque for forth gear
- Maximum torque for second gear
- Maximum torque for sixth gear
- Maximum torque for third gear
- Torque during cranking f(RPM,ECT) 2 maps
- Torque request during standard condition
- Torque request during take off condition 3 maps
Injection System 10 maps
- Fuel quantity injected f(RPM,Trq) 5 maps
- Phase of injection
- Smoke limitation - Lower Lambda value 4 maps
Rail 10 maps
- Rail pressure 8 maps
- Rail pressure limiter f(RPM,Fuel_Q)
- Rail pressure limiter f(RPM,Fuel_T)
Is this my file?
Compare these numbers with your ECU read: this map pack is made for this software version.
- HW
- 4L0910401M
- SW
- 0010
- CAL
- 4L0910401M 0010
- Vehicle
- Audi Q7 3.0 211hp
- ECU
- Bosch EDC16CP34
Not your software version? Other versions on HW 4L0910401M 2
| Version | Vehicle | |
|---|---|---|
| 0030 | Audi Q73.0 233hp | Map pack · 111 maps · €60 |
| CAL 4L0910401M 0030 | Audi Q73.0 233hp | Original file |
Example map from this packFuel quantity injected f(RPM,Trq) · 16 × 16 · read from this very original
Fuel quantity injected f(RPM,Trq)
16 × 16 · X axis: Torque, Nm · Y axis: Engine speed, rpm · values in mm³/st
| Nm →rpm ↓ | 0 | 25 | 50 | 75 | 100 | 125 | 150 | 175 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 550 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 800 | 0.00 | 4.29 | 4.80 | 7.34 | 9.93 | 12.97 | 15.42 | 17.81 | 20.44 | 31.14 | 41.46 | 43.31 | 48.68 | 55.30 | 64.04 | 69.02 |
| 1000 | 0.00 | 3.92 | 4.81 | 7.48 | 9.97 | 12.98 | 15.49 | 17.82 | 20.46 | 30.09 | 39.54 | 42.10 | 47.44 | 53.93 | 62.28 | 67.01 |
| 1250 | 0.00 | 3.52 | 4.83 | 7.64 | 10.03 | 13.00 | 15.58 | 17.85 | 20.50 | 28.93 | 37.40 | 40.75 | 46.10 | 52.45 | 60.38 | 64.82 |
| 1500 | 0.00 | 3.19 | 4.87 | 7.80 | 10.10 | 13.03 | 15.67 | 17.89 | 20.54 | 27.92 | 35.54 | 39.60 | 44.97 | 51.21 | 58.79 | 62.98 |
| 1750 | 0.00 | 2.93 | 4.92 | 7.94 | 10.18 | 13.08 | 15.77 | 17.95 | 20.59 | 27.07 | 33.96 | 38.64 | 44.06 | 50.23 | 57.52 | 61.49 |
| 2000 | 0.00 | 2.74 | 5.00 | 8.08 | 10.27 | 13.13 | 15.86 | 18.03 | 20.66 | 26.38 | 32.65 | 37.87 | 43.37 | 49.49 | 56.57 | 60.34 |
| 2250 | 0.00 | 2.63 | 5.09 | 8.22 | 10.37 | 13.20 | 15.95 | 18.12 | 20.73 | 25.86 | 31.63 | 37.29 | 42.90 | 49.01 | 55.94 | 59.53 |
| 2500 | 0.00 | 2.58 | 5.20 | 8.34 | 10.48 | 13.29 | 16.05 | 18.23 | 20.81 | 25.49 | 30.88 | 36.90 | 42.65 | 48.77 | 55.62 | 59.06 |
| 2750 | 0.00 | 2.61 | 5.32 | 8.46 | 10.60 | 13.38 | 16.14 | 18.36 | 20.90 | 25.28 | 30.41 | 36.70 | 42.61 | 48.79 | 55.62 | 58.91 |
| 3000 | 0.00 | 2.71 | 5.47 | 8.57 | 10.73 | 13.49 | 16.23 | 18.50 | 21.00 | 25.23 | 30.22 | 36.69 | 42.79 | 49.05 | 55.94 | 59.10 |
| 3250 | 0.00 | 2.88 | 5.63 | 8.67 | 10.87 | 13.61 | 16.33 | 18.67 | 21.11 | 25.34 | 30.31 | 36.88 | 43.19 | 49.57 | 56.58 | 59.61 |
| 3500 | 0.00 | 3.13 | 5.80 | 8.76 | 11.02 | 13.74 | 16.43 | 18.84 | 21.22 | 25.61 | 30.68 | 37.25 | 43.81 | 50.34 | 57.54 | 60.44 |
| 3750 | 0.00 | 3.44 | 6.00 | 8.85 | 11.18 | 13.88 | 16.52 | 19.04 | 21.35 | 26.04 | 31.33 | 37.82 | 44.65 | 51.35 | 58.81 | 61.61 |
| 4000 | 0.00 | 3.83 | 6.21 | 8.93 | 11.36 | 14.04 | 16.62 | 19.25 | 21.48 | 26.63 | 32.26 | 38.57 | 45.70 | 52.62 | 60.40 | 63.10 |
| 4250 | 0.00 | 4.29 | 6.44 | 9.00 | 11.54 | 14.21 | 16.71 | 19.48 | 21.63 | 27.38 | 33.46 | 39.52 | 46.98 | 54.14 | 62.31 | 64.92 |
| 4400 | 0.00 | 4.60 | 6.59 | 9.04 | 11.65 | 14.32 | 16.77 | 19.62 | 21.72 | 27.90 | 34.32 | 40.18 | 47.85 | 55.17 | 63.60 | 66.17 |
Swipe the table sideways to see every column.
One of 69 maps in this pack, read from this original file. Every other map is named in the list above.
What you get
What is in our map packs. Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values, ready to read. Every map of the export is included, listed by category — you see each map's name before you buy.
Questions
What is a WinOLS mappack?
The definitions of the maps in one ECU software version — name, category, size, axes and position — exported from WinOLS as a CSV. It is not a DAMOS or A2L file and holds no tuned values.
Will it fit my ECU?
It is made for this software version: compare the HW / SW numbers above with your read.
Why €60?
Our map-pack prices, the original file included: cars €60 when the ECU type came out before 2012, €70 from 2012 on; motorcycles and boats €80; trucks and agricultural machinery €90.
Refunds?
All sales are final — check the numbers and the map list before you buy.
All Audi Q7 map packs · All Bosch EDC16CP34 mappacks · This original file · Search all mappacks