10SW006735 Bosch MED17.9.63 WinOLS mappack
Suzuki Baleno
- One ZIP by e-mail: the original .bin + the .csv mappack for WinOLS — it imports just like a .kp map pack
- Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values
- Every map of the export is included — each map's name is listed below
- Axes checked against this exact original for all 90 maps
- No account — your e-mail and a card
- Check the HW / SW above against your read — all sales are final
E-mailed usually within a minute · your card is charged only when the ZIP is ready
Limiters 30 maps
- Idle engine speed 3 maps
- Maximum speed of vehicle
- RPM Limiter 26 maps
Engine Torque 19 maps
- Calculated engine torque 2 maps
- Limiter of Maximum torque
- Maximum torque for fifth gear
- Maximum torque for first gear
- Maximum torque for forth gear
- Maximum torque for reverse gear 2 maps
- Maximum torque for second gear
- Maximum torque for seventh gear
- Maximum torque for sixth gear
- Maximum torque for third gear
- Optimal engine torque
- Torque monitoring 3 maps
- Torque request during standard condition 2 maps
- Torque request during take off condition - Reverse Gear
Spark Advance 11 maps
- Limiter of knocking sensor 3 maps
- Optimal Spark Advance 2 maps
- Spark Advance base map 6 maps
Turbo System 11 maps
- Limiter of Turbo pressure 4 maps
- Limiter of Turbo pressure f(APS)
- Limiter of Turbo pressure f(IAT) 3 maps
- Linearization of impulsive turbo pressure
- Turbo pressure 2 maps
Injection System 10 maps
- Injection at full load
- Injection base map
- Injection correction 3 maps
- Injection correction f(ECT)
- Lambda for component protection 3 maps
- Requested Lambda
Air Control 6 maps
- Airflow mass through throttle valve
- Exhaust gas temperature
- Reference of maximum throttle valve angle
- Requested engine load
- Throttle valve - operating angle
- Throttle valve f(Accelerator pedal)
Rail 3 maps
- Rail pressure 2 maps
- Rail pressure limiter f(RPM,Fuel_Q)
Is this my file?
Compare these numbers with your ECU read: this map pack is made for this software version.
- HW
- 10SW006735
- SW upgrade
- 33921-68P0*
- Vehicle
- Suzuki Baleno 1.0 112hp
- ECU
- Bosch MED17.9.63
Example map from this packOptimal engine torque · 14 × 16 · read from this very original
Optimal engine torque
14 × 16 · X axis: Air charge, % · Y axis: Engine speed, rpm · values in %
| % →rpm ↓ | 10 | 15 | 20 | 30 | 40 | 50 | 60 | 80 | 100 | 120 | 140 | 160 | 180 | 200 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 400 | 3.00 | 4.80 | 7.10 | 12.00 | 16.70 | 21.39 | 25.00 | 33.30 | 40.50 | 45.00 | 51.00 | 57.00 | 63.00 | 70.00 |
| 600 | 3.00 | 4.80 | 7.10 | 12.00 | 16.70 | 21.39 | 25.00 | 33.30 | 40.50 | 45.00 | 51.00 | 57.00 | 63.00 | 70.00 |
| 800 | 3.50 | 5.60 | 8.60 | 13.00 | 17.90 | 23.01 | 26.70 | 35.00 | 40.50 | 45.00 | 51.00 | 57.00 | 63.00 | 70.00 |
| 1000 | 4.00 | 6.40 | 8.90 | 13.45 | 18.83 | 23.76 | 28.18 | 36.74 | 42.85 | 48.00 | 54.00 | 60.50 | 66.75 | 73.75 |
| 1250 | 4.30 | 6.67 | 9.05 | 13.74 | 18.63 | 23.86 | 28.24 | 37.99 | 45.20 | 51.00 | 57.00 | 63.50 | 70.63 | 77.88 |
| 1500 | 4.39 | 6.77 | 9.15 | 13.77 | 18.63 | 23.55 | 28.24 | 37.76 | 45.50 | 52.50 | 59.00 | 66.50 | 74.50 | 82.00 |
| 1750 | 4.59 | 6.98 | 9.36 | 14.06 | 19.03 | 24.06 | 28.31 | 38.04 | 46.00 | 53.50 | 61.00 | 69.00 | 77.00 | 86.00 |
| 2000 | 4.79 | 7.19 | 9.58 | 14.35 | 19.44 | 24.57 | 28.38 | 38.33 | 46.20 | 55.00 | 63.00 | 71.00 | 79.20 | 88.20 |
| 2500 | 4.67 | 7.10 | 9.53 | 14.26 | 19.33 | 24.33 | 28.80 | 39.15 | 48.00 | 57.00 | 66.00 | 74.50 | 83.00 | 92.00 |
| 3000 | 4.49 | 6.99 | 9.50 | 14.13 | 19.39 | 24.56 | 29.54 | 39.58 | 48.00 | 57.00 | 65.60 | 74.00 | 82.00 | 91.00 |
| 3500 | 4.50 | 6.99 | 9.48 | 14.31 | 19.49 | 24.67 | 29.85 | 40.00 | 49.00 | 58.50 | 67.00 | 75.70 | 84.50 | 94.00 |
| 4000 | 4.92 | 7.41 | 9.89 | 14.44 | 19.85 | 24.75 | 29.94 | 40.43 | 50.00 | 59.00 | 68.50 | 78.50 | 87.00 | 96.00 |
| 4500 | 5.11 | 7.58 | 10.05 | 14.64 | 20.34 | 24.89 | 30.18 | 39.41 | 50.00 | 58.50 | 67.50 | 77.00 | 85.50 | 93.00 |
| 5000 | 5.00 | 7.77 | 10.54 | 15.38 | 20.69 | 25.24 | 30.74 | 40.17 | 51.00 | 59.00 | 67.50 | 75.50 | 84.50 | 92.50 |
| 5500 | 4.90 | 7.63 | 10.37 | 15.38 | 20.46 | 25.62 | 31.47 | 41.08 | 50.75 | 59.50 | 67.70 | 76.10 | 84.50 | 92.50 |
| 6000 | 4.90 | 7.68 | 10.46 | 15.55 | 20.53 | 25.85 | 31.69 | 40.33 | 49.50 | 58.00 | 66.80 | 75.30 | 83.80 | 91.80 |
Swipe the table sideways to see every column.
One of 90 maps in this pack, read from this original file. Every other map is named in the list above.
What you get
What is in our map packs. Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values, ready to read. Every map of the export is included, listed by category — you see each map's name before you buy.
Questions
What is a WinOLS mappack?
The definitions of the maps in one ECU software version — name, category, size, axes and position — exported from WinOLS as a CSV. It is not a DAMOS or A2L file and holds no tuned values.
Will it fit my ECU?
It is made for this software version: compare the HW / SW numbers above with your read.
Why €70?
Our map-pack prices, the original file included: cars €60 when the ECU type came out before 2012, €70 from 2012 on; motorcycles and boats €80; trucks and agricultural machinery €90.
Refunds?
All sales are final — check the numbers and the map list before you buy.
All Bosch MED17.9.63 mappacks · This original file · Search all mappacks