0261208054 1037366474 8N0906018BP 0002 Bosch ME7.5 WinOLS mappack
Audi S3
- One ZIP by e-mail: the original .bin + the .csv mappack for WinOLS
- Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values
- Tuning maps only — no maps for switching off emission systems or errors
- Axes checked against this exact original: 123 of 123 read correctly
- No account — your e-mail and a card
- Check the HW / SW above against your read — all sales are final
Turbo System 19 maps
- Compressor efficiency
- Correction of turbo pressure 8 maps
- Deviation negative threshold of boost pressure for detecting overcharge pressure
- Limiter of Turbo pressure 2 maps
- Turbo pressure 5 maps
- Wastegate Duty Cycle 2 maps
Limiters 18 maps
- Idle engine speed f(ECT) 10 maps
- Maximum speed of vehicle
- RPM Limiter 5 maps
- RPM limiter - Automatic Transmission
- RPM limiter in Neutral
Engine Torque 17 maps
- Optimal engine torque 5 maps
- Torque monitoring 10 maps
- Torque request during take off condition
- Torque request during take off condition - Reverse Gear
Deactivations 15 maps
- Lambda Sensor (1=ON, 0=OFF) 15 maps
Air Control 14 maps
- Airflow mass through throttle valve
- Exhaust gas temperature 3 maps
- MAF
- MAF scaling
- MAF sensor offset
- MAF sensor slope
- MAP sensor offset
- Reference of maximum throttle valve angle
- Requested engine load
- Threshold of end limitation on throttle valve angle
- Throttle valve - operating angle
- Throttle valve f(Accelerator pedal)
Spark Advance 12 maps
- Limiter of knocking sensor 4 maps
- Minimum Spark Advance 2 maps
- Optimal Spark Advance 2 maps
- Spark Advance base map 2 maps
- Spark advance correction f(Air_T) 2 maps
Injection System 9 maps
- Conversion of relative fuel mass into effective injection time
- Injection at partial load
- Injection correction 2 maps
- Injector offset dependent on voltage
- Lambda for component protection
- Phase of injection 2 maps
- Requested Lambda
What you get
What is in our map packs. Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values, ready to read. Tuning maps only — no maps for switching off emission systems or errors.
Questions
What is a WinOLS mappack?
The definitions of the maps in one ECU software version — name, category, size, axes and position — exported from WinOLS as a CSV. It is not a DAMOS or A2L file and holds no tuned values.
Will it fit my ECU?
It is made for this software version: compare the HW / SW numbers above with your read.
Why €60?
Our map-pack prices, the original file included: cars €60 when the ECU type came out before 2012, €70 from 2012 on; motorcycles and boats €80; trucks and agricultural machinery €90.
Refunds?
All sales are final — check the numbers and the map list before you buy.
Need a map pack for another file?
Write to us on WhatsApp — we will tell you whether we can make one for your file and what it costs.
All Bosch ME7.5 mappacks · This original file · Search all mappacks