Volkswagen Jetta Siemens SIMOS 18.2 original ECU files
Original (stock) files read from the Siemens SIMOS 18.2 control unit of the Volkswagen Jetta: 15 files, 3 engine versions. Find your exact file by its hardware (HW), software (SW) or calibration number and compare it with your own read.
Other ECU types in the Volkswagen Jetta 63
Siemens SIMOS 18.2 in other vehicles 1
Engine versions 3
All Volkswagen Jetta Siemens SIMOS 18.2 files 15
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| Volkswagen Jetta1.8 172hp · CPRA | Siemens SIMOS 18.2 | CASC8V30.DAT | 10297155AA | 06K906071B 8099 | €20 · Open |
| Volkswagen Jetta2.0 210hp | Siemens SIMOS 18.2 | — | SC800V3100000 | 06K906071B 8443 | €20 · Open |
| Volkswagen Jetta2.0 210hp | Siemens SIMOS 18.2 | — | — | 06K906071P 8450 | €20 · Open |
| Volkswagen Jetta2.0 210hp | Siemens SIMOS 18.2 | — | — | 06K906071J 8447 | €20 · Open |
| Volkswagen Jetta2.0 210hp | Siemens SIMOS 18.2 | — | — | 06K906071AB 8445 | €20 · Open |
| Volkswagen Jetta2.0 210hp | Siemens SIMOS 18.2 | — | — | 06K906071N 8449 | €20 · Open |
| Volkswagen Jetta2.0 210hp | Siemens SIMOS 18.2 | — | — | 06K906071AC 8446 | €20 · Open |
| Volkswagen Jetta2.0 210hp | Siemens SIMOS 18.2 | — | — | 06K906071T 8451 | €20 · Open |
| Volkswagen Jetta2.0 210hp | Siemens SIMOS 18.2 | — | — | 06K906071K 8448 | €20 · Open |
| Volkswagen Jetta2.0 210hp | Siemens SIMOS 18.2 | — | — | 06K906071C 8444 | €20 · Open |
| Volkswagen Jetta2.0 210hp | Siemens SIMOS 18.2 | — | — | 06K906071AA 8347 | €20 · Open |
| Volkswagen Jetta2.0 211hp | Siemens SIMOS 18.2 | 06K906071Q | 8110 | 06K906071Q 8110 | €20 · Open |
| Volkswagen Jetta2.0 211hp · CPLA | Siemens SIMOS 18.2 | CASC8V30.DAT | 10297111AA | 06K906071T 8113 | €20 · Open |
| Volkswagen Jetta2.0 211hp · CPLA | Siemens SIMOS 18.2 | CASC8V30.DAT | 10297111AA | 06K906071J 8103 | €20 · Open |
| Volkswagen Jetta2.0 211hp | Siemens SIMOS 18.2 | — | — | 06K906071M 8106 | €20 · Open |
All hardware, software and calibration numbers
Find the number from your ECU read (Ctrl+F) and open the matching file.
Hardware (HW) · 2
Software (SW) · 3
Tuning for Volkswagen Jetta Siemens SIMOS 18.2 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Are these files modified?
No. Every file is an original (stock) read of a Volkswagen Jetta Siemens SIMOS 18.2 control unit, delivered exactly as read. If you need a modified file, order tuning below.
How do I find the right file?
Read the ECU with your tool and compare the hardware (HW) and software (SW) numbers — and the calibration when several files share one software number. The vehicle name alone is not enough: the identifiers decide.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.
My number is not listed. What now?
Then we do not have this file: every original file we have is listed on this site and found by its search, so we cannot get it for you. Search one number at a time — HW, SW or calibration — exactly as it appears in your read.
Can you tune Volkswagen Jetta Siemens SIMOS 18.2?
Yes. We make Stage 1/2 files and DPF, EGR, AdBlue/SCR and DTC solutions for Volkswagen Jetta Siemens SIMOS 18.2 (depending on the engine). Upload your read on our file service.