Toyota Sienna original ECU files
23 original (stock) ECU files for the Toyota Sienna: 3 ECU types and 4 engine versions. Find your exact file by its hardware (HW), software (SW) or calibration number and compare it with your own read.
WinOLS map packs for Toyota Sienna: 2 packs from €60
All Toyota Sienna files 23
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 89663-08560 Toyota Sienna2.5 209hp | Denso GEN3 | — | 89663-08560 | 30856000 | €20 · Open |
| 89663-08660 Toyota Sienna2.5 209hp | Denso GEN3 | — | 89663-08660 | 30866000 | €20 · Open |
| 89663-08670 Toyota Sienna2.5 209hp | Denso GEN3 | — | 89663-08670 | 30867000 | €20 · Open |
| 89663-08372 Toyota Sienna3.0 299hp · 2GR-FKS | Denso D76F019XXX | — | 89663-08372 | 30837200 | €20 · Open |
| 89663-08250 Toyota Sienna3.5 270hp | Denso GEN1 | — | 89663-08250 | 30825000 | €20 · Open |
| 89663-08420-A Toyota Sienna3.5 272hp | Denso D76F019XXX | — | 89663-08420-A | 30842000 | €20 · Open |
| 89663-08430 Toyota Sienna3.5 272hp · 2GR-FE | Denso D76F019XXX | — | 89663-08430 | 30843000 | €20 · Open |
| 89663-08590- Toyota Sienna3.5 272hp | Denso D76F019XXX | — | 89663-08590- | 30859000 | €20 · Open |
| 89663-08080 Toyota Sienna3.5 272hp | Denso GEN1 | — | 89663-08080 | 30808000 | €20 · Open |
| 89663-08130 Toyota Sienna3.5 272hp · 2GR-FE | Denso GEN1 | 89661-xxxxx | 89663-08130 | 30813000 | €20 · Open |
| 89663-08150 Toyota Sienna3.5 272hp | Denso GEN1 | — | 89663-08150 | 30815000 | €20 · Open |
| 89663-08180 Toyota Sienna3.5 272hp | Denso GEN1 | — | 89663-08180 | 30818000 | €20 · Open |
| 89663-08181 Toyota Sienna3.5 272hp | Denso GEN1 | — | 89663-08181 | 30818100 | €20 · Open |
| 89663-08211 Toyota Sienna3.5 272hp · 2GR-FEMap pack · 40 maps | Denso GEN1 | 89661-xxxxx | 89663-08211 | 30821100 | €20 · OpenWith maps €60 |
| 89663-08212 Toyota Sienna3.5 272hp | Denso GEN1 | — | 89663-08212 | 30821200 | €20 · Open |
| 89663-08222 Toyota Sienna3.5 272hp · 2GR-FE | Denso GEN1 | — | 89663-08222 | 30822200 | €20 · Open |
| 89663-08240 Toyota Sienna3.5 272hp · 2GR-FE | Denso GEN1 | 89661-xxxxx | 89663-08240 | 30824000 | €20 · Open |
| 89663-08241 Toyota Sienna3.5 272hp | Denso GEN1 | — | 89663-08241 | 30824100 | €20 · Open |
| 30825000 89663-08250 Toyota Sienna3.5 272hp | Denso GEN1 | — | 89663-08250 | 30825000 | €20 · Open |
| 89663-08251 Toyota Sienna3.5 272hp · 2GR-FE | Denso GEN1 | 89661-xxxxx | 89663-08251 | 30825100 | €20 · Open |
| 89663-08261 Toyota Sienna3.5 272hp | Denso GEN1 | — | 89663-08261 | 30826100 | €20 · Open |
| 89661-08410 89663-08330 Toyota Sienna3.5 272hp · 2GR-FEMap pack · 39 maps | Denso GEN1 | 89661-08410 | 89663-08330 | 30833000 | €20 · OpenWith maps €60 |
| 89663-08340 Toyota Sienna3.5 272hp · 2GR-FE | Denso GEN1 | 89661-XXXXX | 89663-08340 | 30834000 | €20 · Open |
No file in this list matches. Search all original files →
Toyota Sienna: engines, ECU types and numbers
Engines with the most original files for the Toyota Sienna, with their ECU types and some of the software numbers listed:
3.5 272hp (2GR-FE): 18 files — Denso GEN1 15, Denso D76F019XXX 3; SW 89663-08420-A, 89663-08430, 89663-08590-.
2.5 209hp: 3 files — Denso GEN3 3; SW 89663-08560, 89663-08660, 89663-08670.
3.0 299hp: 1 file — Denso D76F019XXX 1; SW 89663-08372.
3.5 270hp: 1 file — Denso GEN1 1; SW 89663-08250.
Toyota, Lexus and Hino ECUs carry two numbers: 89661-… is the hardware part number on the ECU label, 89663-… is the software number your tool reads — search with that one. The 8-character calibration ID some tools show is the same software number written another way: 89663-08560 is 30856000.
All hardware, software and calibration numbers
Find the number from your ECU read (Ctrl+F) and open the matching file.
Hardware (HW) · 1
Software (SW) · 22
ECU types in the Toyota Sienna 3
These ECU types in all vehicles 1
Tuning for Toyota Sienna — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which ECU does the Toyota Sienna use?
In our catalogue the Toyota Sienna is listed with Denso GEN1 (16 files), Denso D76F019XXX (4 files) and Denso GEN3 (3 files). Check the ECU label or your read: the hardware number decides.
How do I find the right file?
Read the ECU with your tool and compare the hardware (HW) and software (SW) numbers — and the calibration when several files share one software number. The vehicle name alone is not enough: the identifiers decide.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.
My number is not listed. What now?
Then we do not have this file: every original file we have is listed on this site and found by its search, so we cannot get it for you. Search one number at a time — HW, SW or calibration — exactly as it appears in your read.