Toyota RAV4 Denso GEN3 original ECU files
Original (stock) files read from the Denso GEN3 control unit of the Toyota RAV4: 25 files, 3 engine versions. Find your exact file by its hardware (HW), software (SW) or calibration number and compare it with your own read.
WinOLS map packs for Toyota RAV4: 44 packs from €60
All Toyota RAV4 Denso GEN3 files 25
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 89663-0R492 Toyota RAV42.0 160hp | Denso GEN3 | — | 89663-0R492 | 30R49200 | €20 · Open |
| 89663-0R840 Toyota RAV42.0 160hp | Denso GEN3 | — | 89663-0R840 | 30R84000 | €20 · Open |
| 89663-42Y80 Toyota RAV42.0 160hp | Denso GEN3 | — | 89663-42Y80 | 342Y8000 | €20 · Open |
| 89663-12S50 Toyota RAV42.0 170hp | Denso GEN3 | — | 89663-12S50 | 312S5000 | €20 · Open |
| 89663-12S71 Toyota RAV42.0 170hp | Denso GEN3 | — | 89663-12S71 | 312S7100 | €20 · Open |
| 89663-12Y40 Toyota RAV42.0 170hp | Denso GEN3 | — | 89663-12Y40 | 312Y4000 | €20 · Open |
| 89663-12Z80 Toyota RAV42.0 170hp | Denso GEN3 | — | 89663-12Z80 | 312Z8000 | €20 · Open |
| 89663-42X30 Toyota RAV42.0 170hp | Denso GEN3 | — | 89663-42X30 | 342X3000 | €20 · Open |
| 89663-4A810 Toyota RAV42.0 170hp | Denso GEN3 | — | 89663-4A810 | 34A81000 | €20 · Open |
| 89663-42T90 Toyota RAV42.0 170hp | Denso GEN3 | — | 89663-42T90 | 342T9000 | €20 · Open |
| 89663-42V62 Toyota RAV42.0 170hp | Denso GEN3 | — | 89663-42V62 | 342V6200 | €20 · Open |
| 342M5000 89663-42M50 Toyota RAV42.5 200hp | Denso GEN3 | — | 89663-42M50 | 342M5000 | €20 · Open |
| 89663-42U41 Toyota RAV42.5 200hp | Denso GEN3 | — | 89663-42U41 | 342U4100 | €20 · Open |
| 89663-42W00 Toyota RAV42.5 200hp | Denso GEN3 | — | 89663-42W00 | 342W0000 | €20 · Open |
| 89663-4A050 Toyota RAV42.5 200hp | Denso GEN3 | — | 89663-4A050 | 34A05000 | €20 · Open |
| 89663-4A060 Toyota RAV42.5 200hp | Denso GEN3 | — | 89663-4A060 | 34A06000 | €20 · Open |
| 89663-4A130 Toyota RAV42.5 200hp | Denso GEN3 | — | 89663-4A130 | 34A13000 | €20 · Open |
| 89663-4A141 Toyota RAV42.5 200hp | Denso GEN3 | — | 89663-4A141 | 34A14100 | €20 · Open |
| 89663-4A250 Toyota RAV42.5 200hp | Denso GEN3 | — | 89663-4A250 | 34A25000 | €20 · Open |
| 89663-4A620 Toyota RAV42.5 200hp | Denso GEN3 | — | 89663-4A620 | 34A62000 | €20 · Open |
| 89663-4AJ20 Toyota RAV42.5 200hp | Denso GEN3 | — | 89663-4AJ20 | 34AJ2000 | €20 · Open |
| 89663-4AL10 Toyota RAV42.5 200hp | Denso GEN3 | — | 89663-4AL10 | 34AL1000 | €20 · Open |
| 89663-4AS90 Toyota RAV42.5 200hp | Denso GEN3 | — | 89663-4AS90 | 34AS9000 | €20 · Open |
| 89663-4A021 Toyota RAV42.5 200hp | Denso GEN3 | — | 89663-4A021 | 34A02100 | €20 · Open |
| 89663-0R580 Toyota RAV42.5 200hp | Denso GEN3 | — | 89663-0R580 | 30R58000 | €20 · Open |
No file in this list matches. Search all original files →
Toyota RAV4 Denso GEN3: engines and numbers
Engines with the most original files for the Toyota RAV4 Denso GEN3, with some of the software and hardware numbers listed:
2.5 200hp: 14 files; SW 89663-42M50, 89663-42U41, 89663-42W00.
2.0 170hp: 8 files; SW 89663-12S50, 89663-12S71, 89663-12Y40.
2.0 160hp: 3 files; SW 89663-0R492, 89663-0R840, 89663-42Y80.
Toyota, Lexus and Hino ECUs carry two numbers: 89661-… is the hardware part number on the ECU label, 89663-… is the software number your tool reads — search with that one. The 8-character calibration ID some tools show is the same software number written another way: 89663-0R492 is 30R49200.
All hardware, software and calibration numbers
Find the number from your ECU read (Ctrl+F) and open the matching file.
Software (SW) · 25
Other ECU types in the Toyota RAV4 7
Denso GEN3 in other vehicles 12
Tuning for Toyota RAV4 Denso GEN3 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which engines are listed for the Toyota RAV4 Denso GEN3?
2.5 200hp, 2.0 170hp and 2.0 160hp. Pick your engine in the list below and compare HW and SW with your read.
How do I find the right file?
Read the ECU with your tool and compare the hardware (HW) and software (SW) numbers — and the calibration when several files share one software number. The vehicle name alone is not enough: the identifiers decide.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.
My number is not listed. What now?
Then we do not have this file: every original file we have is listed on this site and found by its search, so we cannot get it for you. Search one number at a time — HW, SW or calibration — exactly as it appears in your read.