Ssangyong Rodius original ECU files
18 original (stock) ECU files for the Ssangyong Rodius: 2 ECU types and 4 engine versions. Find your exact file by its hardware (HW), software (SW) or calibration number and compare it with your own read.
ECU types in the Ssangyong Rodius 2
These ECU types in all vehicles 1
Engine versions 4
All Ssangyong Rodius files 18
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| UCF51B25 D20DTR Ssangyong Rodius2.0 155hp | Delphi DCM3.7 | — | UCF51B00 | UCF51B25 D20DTR A150AT5 | €20 · Open |
| 6715401132 UCF52B00 Ssangyong Rodius2.0 155hp · D20DTR | Delphi DCM3.7 | 6715401132 | UCF52B00 | UCF52B02 D20DTR A155AT5 | €20 · Open |
| UCF50A19 D20DTR Ssangyong Rodius2.0 155hp | Delphi DCM3.7 | — | UCF50A00 | UCF50A19 D20DTR A150AT5 | €20 · Open |
| UCE40B89 D20DTR Ssangyong Rodius2.0 155hp | Delphi DCM3.7 | — | UCE40B00 | UCE40B89 D20DTR Q150MT6 | €20 · Open |
| UCF51B19 D20DTR Ssangyong Rodius2.0 155hp | Delphi DCM3.7 | — | UCF51B00 | UCF51B19 D20DTR A151MT6 | €20 · Open |
| UCE40B89 D20DTR Ssangyong Rodius2.0 155hp | Delphi DCM3.7 | — | UCE40B00 | UCE40B89 D20DTR Q150AT6 | €20 · Open |
| UCF40B86 D20DTR Ssangyong Rodius2.0 155hp | Delphi DCM3.7 | — | UCF40B00 | UCF40B86 D20DTR Y290MT6 | €20 · Open |
| UCF50A15 D20DTR Ssangyong Rodius2.0 155hp | Delphi DCM3.7 | — | UCF50A00 | UCF50A15 D20DTR A150AT5 | €20 · Open |
| UCF50A19 D20DTR Ssangyong Rodius2.0 155hp | Delphi DCM3.7 | — | UCF50A00 | UCF50A19 D20DTR A150MT6 | €20 · Open |
| Ssangyong Rodius2.7 164hp | Delphi DCM3.2 | — | — | — | €20 · Open |
| Ssangyong Rodius2.7 165hp | Delphi | — | — | — | €20 · Open |
| Ssangyong Rodius2.7 165hpMap pack · 21 maps | Delphi | — | — | — | €20 · OpenWith maps €60 |
| Ssangyong Rodius2.7 165hp | Delphi | — | — | — | €20 · Open |
| Ssangyong Rodius2.7 165hp | Delphi | — | — | — | €20 · Open |
| Ssangyong Rodius2.7 165hp | Delphi | — | — | — | €20 · Open |
| Ssangyong Rodius2.7 165hp | Delphi | — | — | — | €20 · Open |
| Ssangyong Rodius2.7 165hp | Delphi | — | — | — | €20 · Open |
| Ssangyong Rodius2.7 XDI 165hpMap pack · 23 maps | Delphi DCM3.2 | — | — | — | €20 · OpenWith maps €60 |
All hardware, software and calibration numbers
Find the number from your ECU read (Ctrl+F) and open the matching file.
Hardware (HW) · 1
Tuning for Ssangyong Rodius — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Are these files modified?
No. Every file is an original (stock) read of a Ssangyong Rodius control unit, delivered exactly as read. If you need a modified file, order tuning below.
How do I find the right file?
Read the ECU with your tool and compare the hardware (HW) and software (SW) numbers — and the calibration when several files share one software number. The vehicle name alone is not enough: the identifiers decide.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.
My number is not listed. What now?
Then we do not have this file: every original file we have is listed on this site and found by its search, so we cannot get it for you. Search one number at a time — HW, SW or calibration — exactly as it appears in your read.
Can you tune Ssangyong Rodius?
Yes. We make Stage 1/2 files and DPF, EGR, AdBlue/SCR and DTC solutions for Ssangyong Rodius (depending on the engine). Upload your read on our file service.