Deutz Mobile Machinery original ECU files
16 original (stock) ECU files for the Deutz Mobile Machinery: 3 ECU types and 3 engine versions. Find your exact file by its hardware (HW), software (SW) or calibration number and compare it with your own read.
ECU types in the Deutz Mobile Machinery 3
These ECU types in all vehicles 1
Engine versions 3
All Deutz Mobile Machinery files 16
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| Deutz Mobile Machinery2.9 70hp | Bosch MD1CC878 | — | — | — | €20 · Open |
| Deutz Mobile Machinery3.6 190hp | Bosch EDC17CV88 | — | — | — | €20 · Open |
| Deutz Mobile Machinery3.6 190hp | Bosch EDC17CV88 | — | — | — | €20 · Open |
| Deutz Mobile Machinery3.6 190hp | Bosch EDC17CV88 | — | — | — | €20 · Open |
| Deutz Mobile Machinery3.6 190hp | Bosch EDC17CV88 | — | — | — | €20 · Open |
| Deutz Mobile Machinery3.6 190hp | Bosch EDC17CV88 | — | — | — | €20 · Open |
| Deutz Mobile Machinery3.6 190hp | Bosch EDC17CV88 | — | — | — | €20 · Open |
| P 802 Deutz Mobile Machinery6.1 175hp | Bosch EDC17CV52 | — | — | P 802 721 680.hex | €20 · Open |
| P 802 Deutz Mobile Machinery6.1 175hp | Bosch EDC17CV52 | — | — | P 802 721 680.hex | €20 · Open |
| 0281020172 P 802 721 680.hex Deutz Mobile Machinery6.1 175hp | Bosch EDC17CV52 | 0281020172 | 1037519867 | P 802 721 680.hex | €20 · Open |
| P 802 Deutz Mobile Machinery6.1 175hp | Bosch EDC17CV52 | — | — | P 802 721 680.hex | €20 · Open |
| P 802 Deutz Mobile Machinery6.1 175hp | Bosch EDC17CV52 | — | — | P 802 721 680.hex | €20 · Open |
| P 802 Deutz Mobile Machinery6.1 175hp | Bosch EDC17CV52 | — | — | P 802 721 680.hex | €20 · Open |
| 0281020172 P 1204 170 210.hex Deutz Mobile Machinery6.1 175hp | Bosch EDC17CV52 | 0281020172 | 1037519867 | P 1204 170 210.hex | €20 · Open |
| P 802 Deutz Mobile Machinery6.1 175hp | Bosch EDC17CV52 | — | — | P 802 721 680.hex | €20 · Open |
| P 802 Deutz Mobile Machinery6.1 175hp | Bosch EDC17CV52 | — | — | P 802 721 680.hex | €20 · Open |
All hardware, software and calibration numbers
Find the number from your ECU read (Ctrl+F) and open the matching file.
Hardware (HW) · 1
Software (SW) · 1
Calibration / SW upgrade · 2
Tuning for Deutz Mobile Machinery — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Are these files modified?
No. Every file is an original (stock) read of a Deutz Mobile Machinery control unit, delivered exactly as read. If you need a modified file, order tuning below.
How do I find the right file?
Read the ECU with your tool and compare the hardware (HW) and software (SW) numbers — and the calibration when several files share one software number. The vehicle name alone is not enough: the identifiers decide.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.
My number is not listed. What now?
Then we do not have this file: every original file we have is listed on this site and found by its search, so we cannot get it for you. Search one number at a time — HW, SW or calibration — exactly as it appears in your read.
Can you tune Deutz Mobile Machinery?
Yes. We make Stage 1/2 files and DPF, EGR, AdBlue/SCR and DTC solutions for Deutz Mobile Machinery (depending on the engine). Upload your read on our file service.