Chevrolet Camaro Delco E39A2 stock ECM files
Original (stock) files read from the Delco E39A2 control unit of the Chevrolet Camaro: 6 files, 1 engine version. Find your exact file by its hardware (HW), software (SW) or calibration number and compare it with your own read.
WinOLS map packs for Chevrolet Camaro: 3 packs from €60
All Chevrolet Camaro Delco E39A2 files 6
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 12632286 12639121 Chevrolet Camaro3.6 308hp | Delco E39A2 | 12632286 | 12648907 | 12639121 | €20 · Open |
| 12632286 12652518 Chevrolet Camaro3.6 308hp | Delco E39A2 | 12632286 | 12648907 | 12652518 | €20 · Open |
| 12632286 12651555 Chevrolet Camaro3.6 308hp | Delco E39A2 | 12632286 | 12648907 | 12651555 | €20 · Open |
| 12632286 12649117 Chevrolet Camaro3.6 308hp | Delco E39A2 | 12632286 | 12648907 | 12649117 | €20 · Open |
| 12639121 12648907 Chevrolet Camaro3.6 308hp | Delco E39A2 | — | 12648907 | 12639121 | €20 · Open |
| 12632286 12648734 Chevrolet Camaro3.6 308hp | Delco E39A2 | 12632286 | 12648907 | 12648734 | €20 · Open |
No file in this list matches. Search all original files →
Chevrolet Camaro Delco E39A2: engines and numbers
Engines with the most original files for the Chevrolet Camaro Delco E39A2, with some of the software and hardware numbers listed:
3.6 308hp: 6 files; SW 12648907; HW 12632286.
All hardware, software and calibration numbers
Find the number from your ECU read (Ctrl+F) and open the matching file.
Hardware (HW) · 1
Software (SW) · 1
Other ECU types in the Chevrolet Camaro 9
Delco E39A2 in other vehicles 1
Tuning for Chevrolet Camaro Delco E39A2 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which engines are listed for the Chevrolet Camaro Delco E39A2?
3.6 308hp. Pick your engine in the list below and compare HW and SW with your read.
How do I find the right file?
Read the ECU with your tool and compare the hardware (HW) and software (SW) numbers — and the calibration when several files share one software number. The vehicle name alone is not enough: the identifiers decide.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.
My number is not listed. What now?
Then we do not have this file: every original file we have is listed on this site and found by its search, so we cannot get it for you. Search one number at a time — HW, SW or calibration — exactly as it appears in your read.