Audi S3 Temic DQ250 EXX/FXX original ECU files
Original (stock) files read from the Temic DQ250 EXX/FXX control unit of the Audi S3: 14 files, 5 engine versions. Find your exact file by its hardware (HW), software (SW) or calibration number and compare it with your own read.
Other ECU types in the Audi S3 11
Temic DQ250 EXX/FXX in other vehicles 14
Engine versions 5
All Audi S3 Temic DQ250 EXX/FXX files 14
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| Audi S32.0 310hp | Temic DQ250 EXX/FXX | — | v069W41002ec__getriebe_DSG_ZcW4 | 02E300016B 4010 | €20 · Open |
| Audi S32.0 16v 265hp | Temic DQ250 EXX/FXX | — | v0691t0602ea__getriebe_DSG_Rc1t | 02E300012G 1906 | €20 · Open |
| Audi S32.0 256hp | Temic DQ250 EXX/FXX | 02E927770AL | v0692v1502ea__getriebe_DSG_Rc2v | 02E300012N 2115 | €20 · Open |
| Audi S32.0 265hp | Temic DQ250 EXX/FXX | — | v0695e1102ea__getriebe_DSG_RW5e | 02E300012S 2211 | €20 · Open |
| Audi S32.0 265hp | Temic DQ250 EXX/FXX | — | v0695f0102ea__getriebe_DSG_Rc5f | 02E300013 2201 | €20 · Open |
| Audi S32.0 265hp · CCZB | Temic DQ250 EXX/FXX | — | v069D22002ec__getriebe_DSG_RcD2 | 02E300014D 3120 | €20 · Open |
| Audi S32.0 265hp | Temic DQ250 EXX/FXX | — | v0699k3602ec__getriebe_DSG_Zl9k | 02E300013T 2736 | €20 · Open |
| Audi S32.0 265hp | Temic DQ250 EXX/FXX | — | v0698y1802ec__getriebe_DSG_Ch8y | 02E300057B 2718 | €20 · Open |
| Audi S32.0 265hp | Temic DQ250 EXX/FXX | — | v0699j3902ec__getriebe_DSG_Rc9j | 02E300013S 2739 | €20 · Open |
| Audi S32.0 265hp · BWA | Temic DQ250 EXX/FXX | 02E927770AL | v0697q0102ea__getriebe_DSG_Rc7q | 02E300013N 2601 | €20 · Open |
| Audi S32.0 265hp | Temic DQ250 EXX/FXX | 02E927770AL | v0699j3102ec__getriebe_DSG_Rc9j | 02E300013S 2731 | €20 · Open |
| Audi S32.0 265hp · CCZA | Temic DQ250 EXX/FXX | — | v0691t7102ea__getriebe_DSG_Rc1t | 02E300012G 1971 | €20 · Open |
| Audi S32.0 272hp | Temic DQ250 EXX/FXX | — | — | — | €20 · Open |
| Audi S32.0 272hp · BWA | Temic DQ250 EXX/FXX | 02E927770AM | v0691t7402ea__getriebe_DSG_Rc1t | 02E300012G 1974 | €20 · Open |
All hardware, software and calibration numbers
Find the number from your ECU read (Ctrl+F) and open the matching file.
Hardware (HW) · 2
Software (SW) · 13
Tuning for Audi S3 Temic DQ250 EXX/FXX — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Are these files modified?
No. Every file is an original (stock) read of a Audi S3 Temic DQ250 EXX/FXX control unit, delivered exactly as read. If you need a modified file, order tuning below.
How do I find the right file?
Read the ECU with your tool and compare the hardware (HW) and software (SW) numbers — and the calibration when several files share one software number. The vehicle name alone is not enough: the identifiers decide.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.
My number is not listed. What now?
Then we do not have this file: every original file we have is listed on this site and found by its search, so we cannot get it for you. Search one number at a time — HW, SW or calibration — exactly as it appears in your read.
Can you tune Audi S3 Temic DQ250 EXX/FXX?
Yes. We make Stage 1/2 files and DPF, EGR, AdBlue/SCR and DTC solutions for Audi S3 Temic DQ250 EXX/FXX (depending on the engine). Upload your read on our file service.