Mecalac — ECU tuning files by software version
18 software versions · 12 models · 5 controller types · 2014–2022
This page is the entry point from the vehicle side. The work is still done per calibration: find the model below, open the software version indexed on it, and that page shows what can be done on the exact file and what it costs.
Controllers used on Mecalac
| Controller | Versions | Models |
|---|---|---|
| Caterpillar A6E11 | 10 | TLB700, BL890, TLB-890, TLB890PC, TLBB890BH, TLB-980 |
| Bosch MD1CC878 | 5 | MCR8, 11MWR, 7MWR, TLB870 |
| Caterpillar ADEM 5 | 1 | BL840 |
| Caterpillar A5 | 1 | TLB890 |
| Caterpillar A6E10 | 1 | TLB890 |
Models and software versions
Mecalac BL890
3 software versions · C3.6TDI, EEP-C3.6TDI
Mecalac TLB890
3 software versions · C4.4TDI, C3.6TDI
Mecalac TLB-890
2 software versions · C3.6TDI
Mecalac MCR8
2 software versions · 2.9TDI, 3.6TDI
Mecalac TLBB890BH
1 software version · 3.6TDI
Mecalac TLB890PC
1 software version · 3.6TDI
Mecalac TLB-980
1 software version · C3.6TDI
Mecalac BL840
1 software version · C4.4TDI
Mecalac 7MWR
1 software version · 2.9TDI
Mecalac 11MWR
1 software version · 3.6TDI
Mecalac TLB700
1 software version · C3.6TDI
Mecalac TLB870
1 software version · 2.9TDI
What you see here is only a part of the software versions we have already worked on. Any modification can be made for any version, make or model, including ones not in this list — find your make and controller on the site, and if your version is not there, send us the original file. We check it and add it to the list shortly.