Isuzu NPR 7.8TDI — Denso SH7059 — 98260060AB 98486123 AW124H13T412
ECU tuning and emission-solution file for this exact calibration · 215hp · 2015
About this file
This page covers one exact calibration: Denso SH7059 with software 98260060AB 98486123 AW124H13T412, as indexed on the Isuzu NPR 7.8TDI. Work is done on your own original read — we do not send a generic file for the controller family, because two vehicles sharing a controller can carry different maps, limiters and diagnostics.
Send the file exactly as your tool saved it and tell us which tool produced it. You get the modified file back in the same format, with the checksum corrected, ready to write. Turnaround is 1–3 hours for the solutions listed as available below.
If your readout shows a different software number from the same family, use the version list at the bottom of the page — every calibration we have indexed has its own page.
Everything on this page is reference information. Not finding your exact version here does not mean we cannot do it — a solution can be developed for any calibration. Create an order on the file service and send us the original read.
What can be done on this ECU
These are the services offered for the Denso SH7059 and their list prices. Ordering several in one file is cheaper — the calculator below applies the bundle rules.
| Service | Price | Notes |
|---|---|---|
| DPF/FAP Delete | 105 € | Dear customers! If your sw reading file is AP43NCLAP30J then please update on other sw with dealer device and then read new sw because for this sw AP43NCLAP30J counter not possible stop! |
| EGR/AGR Removal | 95 € | You should disconnect EGR plug if egr electrilcally broken and close it with methal gasket |
| SCR/AdBlue OFF | 190 € | |
| Stage 1 tuning file | 140 € | Please visit our website tuning catalog to see final results after Stage 1: https://auto-remap.com/catalog/cars |
| Full Decat/Second Lambda Deactivation | 70 € | |
| Throttle Valve TVA Disable | 95 € | |
| EVAP System Disable | 70 € | |
| Swirl valve/Flaps OFF | 95 € | |
| Secondary System Disable | 70 € | |
| DTC's selectivity OFF | 60 € | |
| Stage 1+/Stage 2 tuning file | 140 € | |
| First EGT sensor OFF (if present) | 50 € | Please remember that FIrst EGT sensor is part of turbo system, but limp mode will be deactivating after our EGT off solution. Not on all cars this sensor present! |
| Checksumm correction | 50 € | Checksumm correction: select this option ONLY if you really need checksumm and your device not do it automatically, because this option cost additional money! |
| Back to ORIGINAL file (restore file to original) | 30 € | Please select this option only if you really need to recovery all changes to original. In case if your attached file after our checking content original changes, order will be completed and the cost of the checking will be deducted from your account!!! Because we are loosing time on checking and comparing it with original database= this is same like price return to original. |
| E85 Flex Fuel adaptation | 180 € |
Prices on this page are for information. The exact price is confirmed inside the order on the file service, after we see your file.
Price calculator
Ordering runs through the file service and needs an account. Quote this software number in the order: 98260060AB 98486123 AW124H13T412
Prices on this page are for information. The exact price is confirmed inside the order on the file service, after we see your file.
How it works
- Read the ECU with your tool and save the original file.
- Find your software number on this page and check the price in the calculator above. Nothing is uploaded here and no account is needed at this step.
- Register on the file service and open New order.
- Upload the original file there and pick the same solutions you priced on this page.
- We modify the file and correct the checksum.
- Download the finished file on the order page within 1–3 hours, then write it back and clear the codes.
Vehicles running this calibration
| Make | Model | Engine | Power | Year |
|---|---|---|---|---|
| Isuzu | NPR | 7.8TDI | 215hp | 2015 |
Identifiers on this file
The source data lists these numbers as a single field without marking which is software and which is hardware. The count below shows how often each number appears across the whole database: a number unique to this file is the calibration itself, a number shared by hundreds of files sits at hardware or bootloader level.
| 98260060AB | unique to this file — the calibration itself |
|---|---|
| 98486123 | unique to this file — the calibration itself |
| AW124H13T412 | unique to this file — the calibration itself |
Specifications
| Make | Isuzu |
|---|---|
| Model | NPR |
| Engine | 7.8TDI |
| Power | 215hp |
| ECU | Denso SH7059 |
| SW / HW identifiers | 98260060AB 98486123 AW124H13T412 |
| Model years | 2015 |
| Vehicles indexed | 1 |
| Accepted formats | .bin, .hpt, .ctz, and other tool outputs — returned in the same format |
| Turnaround | 1–3 hours |
Other software versions on Denso SH7059
Related reading
What you see here is only a part of the software versions we have already worked on. Any modification can be made for any version, make or model, including ones not in this list — find your make and controller on the site, and if your version is not there, send us the original file. We check it and add it to the list shortly.
FAQ
- My software number is AW124H13T412 — is this the right page?
- Yes. This page is built around the identifier set 98260060AB 98486123 AW124H13T412 on the Denso SH7059. If your readout shows a different number from the same family, open it from the version list on this page.
- Which file do you need from me?
- The original read from the ECU, in whatever format your tool produced. Tell us the tool so the file comes back in a format you can write.
- How long does it take?
- 1–3 hours for the solutions marked available on this page. Anything marked on request is answered after we look at the file.
- Is the checksum corrected?
- Yes. The returned file is ready to write back.
- Can several solutions go into one file?
- Yes, and that is the cheaper route — the calculator applies the bundle pricing automatically as you tick them.